WACKER® AK 10
WACKER® AK 10 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits good solubility in a wide range of solvents and minimal changes in physical properties over a broad temperature range.
Properties
- Physical Form
- Liquid
Other characteristics
- Brand
- WACKER
- Synonyms
- Dimethicone
- Functions
Anti-Foaming Agent, Lubricant, Polishing Agent, Release Agent, Solvent, Water Repellent
- Product Type
- Heat Transfer Fluid, Hydraulic Fluids
- Heat Transfer Fluid
- Hydraulic Fluids
- Certifications & Compliance
BSE & TSE, Coalition of Northeastern Governors (CONEG), Consumer Product Safety Improvement Act (CPSIA), Directive 2000/53/EC, Directive 2011/65/EC amended through EU/2015/863 (RoHS), EC No.1907/2006, EU Packaging Directive (94/62/EC), REACH Exempt (Europe), Regulation (EC) No. 1005/2009, Regulation (EU) No. 1169/2011, Regulation (EU) No. 2019/1021, Waste Electrical & Electronic Equipment Directive (WEEE)
- Color
- Transparent
- Markets
- HI&I Care
- Industrial
- Appearance
- Clear colorless liquid
- Properties
Minimal change in physical properties over a broad temperature range; Excellent water-repellent properties; Good dielectric properties; Low surface tension and thus high surface activity; Chemically highly unreactive; Low solidifying point; High heat resistance; Good solubility in a wide range of solvents
- HII Features
- Chemical Stability
- Excellent Solubility
- Heat Resistance
- High Solvency
- High Surface Activity
- Low Surface Energy
- Lubricity
- Temperature Resistant
- Technology
- Cleaning Ingredients
- Industrial Additives & Materials
- Ready-to-Use Products
- Base Oil
- Polydimethyl Siloxane
- Labeling Claims
- Animal Products-free
- BSE-free
- Non-Reactive
- Odor-free
- TSE-free
- Quality Standards
- BS EN 71:2016 Safety of Toys Standard
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (at 25°C) | approx. 0.93 | g/cm³ | DIN 51757 |
| Flash Point | 180 | °C | ISO 2592 |
| Ignition Temperature | 365 | °C | EN 14522 |
| Kinematic Viscosity (at 25°C) | approx. 10 | mm²/s | DIN 53019 |
| Refractive Index (at 25°C) | approx. 1.399 | — | DIN 51423 |
| Surface Tension (at 25°C) | approx. 0.020 | N/m | — |
