ULTEM™ Resin 1000P100
SABIC's Specialties Business ULTEM 1000P100 Resin is an unreinforced amorphous polyetherimide (PEI) powder. This powder is available with an average particle size (D50) of 100 micron and a maximum particle size (D100) of 150 micron. It may offer a high glass transition temperature (Tg) of 217°C. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant. The material is RoHS. The base material is transparent amber colored.
Properties
- Physical Form
- Powder
- Solid
Other characteristics
- Brand
- ULTEM™ Resin
- Polymer Name
- Polyether Imide (PEI)
- Additives Included
- Flame Retardant, Heat Stabilizer
- Flame Retardant
- Heat Stabilizer
- Processing Methods
- Sintering
- Note
ᵃ Back Pressure, Screw Speed, Shot to Cylinder Size and Vent Depth are only mentioned as general guidelines. These may not apply or need adjustment in specific situations such as low shot sizes, thin wall molding and gas-assist molding. Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Availability
ULTEM™ resin is available in transparent and opaque custom colors, and can be glass filled for added stiffness.
- Key Benefits
- Heat Resistance
- Dimensional Stability
- Dielectric Performance
- Miniaturization and Thin Wall
- Resilience
- Technology
- CASE Ingredients
- Plastics
- Labeling Claims
- Bio-based
- Food Contact Acceptable
- Low Toxicity
- Sustainable
Technical data
Table 1 of 6
21 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Ball Indentation Hardness (H358/30) ¹¹ | 140 | MPa | ISO 2039-1 |
| Flexural Modulus (at 2 mm/min) ¹¹ | 3300 | MPa | ISO 178 |
| Flexural Stress (Yield, at 2 mm/min) ¹¹ | 160 | MPa | ISO 178 |
| Hardness (Rockwell M) ¹¹ | 109 | — | ASTM D785 |
| Hardness (Rockwell M) ¹¹ | 106 | — | ISO 2039-2 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 3200 | MPa | ISO 527 |
| Tensile Strain (Break, 50 mm/min) ¹¹ | 50 | % | ISO 527 |
| Tensile Strain (Yield, 50 mm/min) ¹¹ | 6 | % | ISO 527 |
| Tensile Stress (Yield, 50 mm/min) ¹¹ | 110 | MPa | ISO 527 |
| Tensile Strain (Yield, Type I, 50 mm/min) ¹¹ | 7 | % | ASTM D638 |
| Tensile Stress (Yield, Type I, 50 mm/min) ¹¹ | 115 | MPa | ASTM D638 |
| Tensile Strain (Break, Type I, 50 mm/min) ¹¹ | 60 | % | ASTM D638 |
Table 2 of 6
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹¹ | 1.27 | g/cm³ | ISO 1183 |
| Melt Volume Rate (at 360°C, 5.0 kg) ¹¹ | 13 | cm³/10 min | ISO 1133 |
| Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹ | 0.2 | % | ISO 62-4 |
| Moisture Absorption (at 23°C, 50% RH, Equilibrium) ¹¹ | 0.7 | % | ISO 62-4 |
| Water Absorption (at 23°C, 24hrs) ¹¹ | 0.25 | % | ASTM D570 |
| Water Absorption (at 23°C, 24hrs) ¹¹ | 0.25 | % | ISO 62-1 |
| Water Absorption (at 23°C, saturated) ¹¹ | 1.25 | % | ASTM D570 |
| Water Absorption (at 23°C, saturated) ¹¹ | 1.25 | % | ISO 62-1 |
| Specific Gravity ¹¹ | 1.27 | — | ASTM D792 |
| Melt Flow Rate (at 337°C, 6.6 kgf) ¹¹ | 9 | g/10 min | ASTM D1238 |
| Poisson's Ratio ¹¹ | 0.36 | — | ASTM E132 |
Table 3 of 6
17 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 209 | °C | ISO 75/Bf |
| Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 192 | °C | ISO 75/Af |
| Vicat Softening Temperature (Rate A/50) ¹¹ | 215 | °C | ISO 306 |
| Vicat Softening Temperature (Rate B/50) ¹¹ | 211 | °C | ISO 306 |
| Vicat Softening Temperature (Rate B/50) ¹¹ | 211 | °C | ASTM D1525 |
| Vicat Softening Temperature (Rate B/120) ¹¹ | 212 | °C | ISO 306 |
| Coefficient of Thermal Expansion (at -40°C to 150°C, flow) ¹¹ | 0.000052 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 150°C, xflow) ¹¹ | 0.000052 | 1/°C | ISO 11359-2 |
| Ball Pressure Test (at 123°C to 127°C) ¹¹ | Pass | — | IEC 60695-10-2 |
| Thermal Conductivity ¹¹ | 0.22 | W/m-°C | ASTM C177 |
| Thermal Conductivity ¹¹ | 0.22 | W/m-°C | ISO 8302 |
| Heat Deflection Temperature (at 0.45 MPa, 6.4 mm, Unannealed) ¹¹ | 210 | °C | ASTM D648 |
Table 4 of 6
25 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Volume Resistivity ¹¹ | 1.00E+15 | Ω.cm | IEC 60093 |
| Volume Resistivity ¹¹ | 1.00E+17 | Ω.cm | ASTM D257 |
| Surface Resistivity (ROA) ¹¹ | min. 1.E+15 | Ω | IEC 60093 |
| Dielectric Strength (in oil, at 0.8mm) ¹¹ | 33 | kV/mm | IEC 60243-1 |
| Dielectric Strength (in oil, at 1.6mm) ¹¹ | 25 | kV/mm | IEC 60243-1 |
| Dielectric Strength (in oil, at 1.6mm) ¹¹ | 28 | kV/mm | ASTM D149 |
| Dielectric Strength (in oil, at 3.2mm) ¹¹ | 16 | kV/mm | IEC 60243-1 |
| Dielectric Strength (in oil, at 3.2mm) ¹¹ | 19.7 | kV/mm | ASTM D149 |
| Relative Permittivity (1 MHz) ¹¹ | 2.9 | — | IEC 60250 |
| Dissipation Factor (at at 1 MHz) ¹¹ | 0.006 | — | IEC 60250 |
| Relative Permittivity (50/60 Hz) ¹¹ | 2.9 | — | IEC 60250 |
| Dissipation Factor (at 50/60 Hz) ¹¹ | 0.0005 | — | IEC 60250 |
Table 5 of 6
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | No break | kJ/m² | ISO 180/1U |
| Izod Impact (Unnotched, 80*10*4, at -30°C) ¹¹ | No break | kJ/m² | ISO 180/1U |
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 6 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*4, at -30°C) ¹¹ | 6 | kJ/m² | ISO 180/1A |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ | 4 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at -30°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ | 4 | kJ/m² | ISO 179/1eA |
| Izod Impact (Unnotched, at 23°C) ¹¹ | 1800 | J/m | ASTM D4812 |
| Izod Impact (Unnotched, at -30°C) ¹¹ | 1540 | J/m | ASTM D4812 |
| Izod Impact (Notched, at 23°C) ¹¹ | 53 | J/m | ASTM D256 |
| Izod Impact (Notched, at -30°C) ¹¹ | 50 | J/m | ASTM D256 |
| Izod Impact (Reverse Notched, 3.2 mm) ¹¹ | 1335 | J/m | ASTM D256 |
| Color (at 23°C) ¹¹ | 36 | J | ASTM D3029 |
Table 6 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Oxygen Index (LOI) ᵖ | 47 | % | ASTM D2863 |
| Oxygen Index (LOI) ᵖ | 47 | % | ISO 4589 |
