LNP™ THERMOCOMP™ Compound AF002XXC

Chemical Family: Acrylonitrile Butadiene Styrene (ABS)Styrenics

LNP THERMOCOMP AF002XXC compound is based on Acrylonitrile Butadiene Styrene (ABS) resin containing 10% glass fiber.

Product families

Applications

Consumer Goods — Appliances & Electronics

Electrical & Electronics — Devices & Assemblies

Consumer Electronics
Displays

Healthcare & Pharma — Medical

Laboratory & Diagnostics
Medical Devices & Assemblies

Electrical & Electronics — Parts & Components

Housings & Enclosures

Product Families

Plastics — Basic Thermoplastics

Styrenics

Other characteristics

Brand: LNP™ THERMOCOMP™ Compound
Polymer Name: Acrylonitrile Butadiene Styrene (ABS)
Fillers Included: Glass Fiber
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Consumer Goods
Electrical & Electronics
Healthcare & Pharma
Flame Rating: UL 94 HB
Technology: Plastics
Material Features: Cost Effective
High Modulus
High Stiffness
Country Availability: Canada
China (Mainland)
Mexico
USA
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Cell Phones
Clinical Diagnostics
Computer Components
Displays
Electrical Enclosure
Electrical Internal Frame
Electrical/Electronic Applications
Internal Armature
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

10 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break) ¹¹	64	MPa	ISO 527
Tensile Stress (Break) ¹¹	66	MPa	ASTM D638
Tensile Strain (Break) ¹¹	2.7	%	ISO 527
Tensile Strain (Break) ¹¹	2.5	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	4130	MPa	ASTM D638
Flexural Stress ¹¹	107	MPa	ISO 178
Flexural Stress ¹¹	105	MPa	ASTM D790
Flexural Modulus ¹¹	4500	MPa	ISO 178
Flexural Modulus ¹¹	4200	MPa	ASTM D790
Tensile Modulus (at 1 mm/min) ¹¹	4200	MPa	ISO 527

Table 2 of 6

7 rows

Characteristic	Value	Unit	Method
Density ¹¹	1.1	g/cm³	ISO 1183
Density ¹¹	1.111	g/cm³	ASTM D792
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.41	%	ISO 294
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.4	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.4	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.38	%	ISO 294
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.38	%	ISO 62

Table 3 of 6

6 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	101	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	92	°C	ASTM D648
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	95	°C	ISO 75/Af
Relative Temperature Index (Electrical) ᵖ ¹¹	60	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	60	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	60	°C	UL 746B

Table 4 of 6