LNP™ THERMOCOMP™ Compound RX06420

Chemical Family: Polyamides

SABIC's Specialties Business LNP THERMOCOMP RX06420 compound is based on Nylon 6/6 resin containing 20% glass fiber. Added features of this grade include: Easy Molding, Low Extractables, Mold Release. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Product families

Applications

Consumer Goods — Appliances & Electronics

Building & Construction — Building Materials

Pipes & Plumbing

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Printing & Packaging — Packaging

Food & Beverage Packaging
Industrial & Transport Packaging
Non-Food Consumer Packaging

Electrical & Electronics — Parts & Components

Housings & Enclosures

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Other characteristics

Brand: LNP™ THERMOCOMP™ Compound
Polymer Name: Polyamide 66 (PA 66)
Fillers Included: Glass Fiber
Flexural Modulus: 5580.0 - 5580.0 MPa
Additives Included: Mold Release Agent
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Building & Construction
Consumer Goods
Electrical & Electronics
Printing & Packaging
Technology: Plastics
Labeling Claims: Food Contact Acceptable
No Added PFAS
Material Features: Cost Effective
Easy To Mold
Food Contact Acceptable
Good Mold Release
Good Moldability
Good Processability
High Modulus
High Stiffness
Country Availability: Canada
China (Mainland)
Mexico
USA
Plastics and Elastomers End Uses: Appliances
Consumer Applications
Electrical Enclosure
Electrical Internal Frame
Food Packaging
Home Appliances
Hoses
Internal Armature
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 5

8 rows

Characteristic	Value	Unit	Method
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	161	MPa	ASTM D790
Tensile Stress (Break) ¹¹	113	MPa	ASTM D638
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	5990	MPa	ASTM D790
Tensile Strain (Break) ¹¹	2.7	%	ASTM D638
Flexural Modulus (at 2 mm/min) ¹¹	5580	MPa	ISO 178
Tensile Modulus (at 50 mm/min) ¹¹	6390	MPa	ASTM D638
Flexural Stress ¹¹	179	MPa	ASTM D790
Flexural Modulus ¹¹	6260	MPa	ASTM D790

Table 2 of 5

3 rows

Characteristic	Value	Unit	Method
Density ¹¹	1.29	g/cm³	ASTM D792
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	1 - 3	%	ASTM D955
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.5	%	ASTM D955

Table 3 of 5

1 row

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	221	°C	ASTM D648

Table 4 of 5

2 rows

Characteristic	Value	Unit	Method
Izod Impact (Unnotched, at 23°C) ¹¹	423	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	50	J/m	ASTM D256

Table 5 of 5

10 rows

Characteristic	Value	Unit
Drying Temperature ⁷	80	°C
Drying Time ⁷	4	Hrs
Maximum Moisture Content ⁷	0.15 - 0.25	%
Melt Temperature ⁷	280 - 305	°C
Front - Zone 3 Temperature ⁷	295 - 305	°C
Middle - Zone 2 Temperature ⁷	280 - 295	°C
Rear - Zone 1 Temperature ⁷	265 - 275	°C
Mold Temperature ⁷	95 - 110	°C
Back Pressure ⁷	0.2 - 0.3	MPa
Screw Speed ⁷	30 - 60	rpm