NORYL GTX™ Resin APS130
SABIC's Specialties Business NORYL GTX APS130 resin is a 30% glass fiber reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade has high stiffness, excellent chemical resistance, and high heat resistance. NORYL APS130 resin is an excellent candidate for automotive under-the-hood applications such as ignition systems and electrical components This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Product families
Applications
- Electrical & Electronic Systems
- Powertrain & UTH
- Batteries
- Connectors
- Housings & Enclosures
- Switches & Relays
Product Families
- Blends & Alloys
Other characteristics
- Brand
- NORYL GTX™ Resin
- Density
- 1440.0 - 1440.0 kg/m³
- Polymer Name
- PPO/PS Alloy
- Flexural Modulus
- 8430.0 - 8430.0 MPa
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Fillers Included
- Glass Fiber
- Additives Included
- Impact Modifier
- Mold Release Agent
- Material Features
- Chemical Resistant
- Dimensional Stability
- Good Mold Release
- High Hydrolytic Stability
- High Stiffness
- High Strength
- High Tensile Strength
- Impact Modified
- Country Availability
- China (Mainland)
- Plastics and Elastomers End Uses
- Automotive Under The Hood
- Back Panel
- Battery Cover
- Corner Support Plates
- Crash Protection
- Electrical Components
- Electrical/Electronic Applications
- Front Panel
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹¹ | 1.44 | g/cm³ | ISO 1183 |
| Mold Shrinkage (flow) ᵍ ¹¹ | 0.13 | % | SABIC method |
| Mold Shrinkage (xflow) ᵍ ¹¹ | 0.16 | % | SABIC method |
| Specific Gravity ¹¹ | 1.44 | — | ASTM D792 |
| Water Absorption (at 23°C, 24hrs) ¹¹ | 0.02 | % | ASTM D570 |
| Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹ | 0.25 - 0.7 | % | SABIC method |
| Melt Flow Rate (at 300°C, 5.0 kgf) ¹¹ | 29.1 | g/10 min | ASTM D1238 |
Table 2 of 6
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus (at 2 mm/min) ¹¹ | 8110 | MPa | ISO 178 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 6640 | MPa | ISO 527 |
| Tensile Strain (Break, 5 mm/min) ¹¹ | 1.5 | % | ISO 527 |
| Flexural Stress (Break, 2 mm/min) ¹¹ | 170 | MPa | ISO 178 |
| Tensile Stress (Break, 5 mm/min) ¹¹ | 120 | MPa | ISO 527 |
| Tensile Stress (Yield) ¹¹ | 112 | MPa | SABIC - Japan Method |
| Tensile Strain (Break) ¹¹ | 8 | % | SABIC - Japan Method |
| Flexural Stress ¹¹ | 156 | MPa | ASTM D790 |
| Flexural Modulus ¹¹ | 8430 | MPa | ASTM D790 |
Table 3 of 6
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 264 | °C | ISO 75/Bf |
| Heat Deflection Temperature (at 0.45 MPa, 6.4 mm, Unannealed) ¹¹ | 267 | °C | ASTM D648 |
| Coefficient of Thermal Expansion (at -30°C to 30°C) ¹¹ | 0.000025 - 0.000055 | 1/°C | TMA |
Table 4 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Comparative Tracking Index ¹¹ | 150 | V | IEC 60112 |
| Volume Resistivity ¹¹ | 1.20E+17 | Ω.cm | ASTM D257 |
| Surface Resistivity ¹¹ | 1.00E+16 | Ω | ASTM D257 |
| Dielectric Strength (in oil, at 1.6mm) ¹¹ | 22.1 | kV/mm | ASTM D149 |
| Relative Permittivity (50/60 Hz) ¹¹ | 3.3 | — | ASTM D150 |
Table 5 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Charpy Impact (at -30°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹ | 22 | kJ/m² | ISO 179/1eU |
| Charpy Impact (at -30°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ | 6 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹ | 59 | kJ/m² | ISO 179/1eU |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹ | 21 | kJ/m² | ISO 179/1eA |
| Izod Impact (Notched, at 23°C) ¹¹ | 88 | J/m | ASTM D256 |
Table 6 of 6
14 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁷ | 120 - 150 | °C |
| Drying Time ⁷ | 4 - 8 | Hrs |
| Drying Time (Cumulative) ⁷ | 24 | Hrs |
| Maximum Moisture Content ⁷ | 0.02 | % |
| Melt Temperature ⁷ | 300 - 330 | °C |
| Nozzle Temperature ⁷ | 300 - 330 | °C |
| Front - Zone 3 Temperature ⁷ | 295 - 330 | °C |
| Middle - Zone 2 Temperature ⁷ | 290 - 320 | °C |
| Rear - Zone 1 Temperature ⁷ | 280 - 315 | °C |
| Mold Temperature ⁷ | 95 - 150 | °C |
| Back Pressure ⁷ | 0.7 - 1.4 | MPa |
| Screw Speed ⁷ | 50 - 100 | rpm |
