LNP™ THERMOCOMP™ Compound 2X95787

Name: LNP™ THERMOCOMP™ Compound 2X95787
Brand: LNP™ THERMOCOMP™ Compound

LNP THERMOCOMP 2X95787 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 15% glass fiber.

Product families

Industrial — Chemical & Industrial Manufacturing

Electrical & Electronics — Devices & Assemblies

Healthcare & Pharma — Medical

Electrical & Electronics — Parts & Components

Industrial — Power, Water & Utilities

Plastics — Engineering & Specialty Polymers

Brand: LNP™ THERMOCOMP™ Compound
Polymer Name: Ethylene Tetrafluoroethylene Copolymer (ETFE)
Fillers Included: Glass Fiber
Flexural Modulus: 3400.0 - 3400.0 MPa
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Electrical & Electronics
Healthcare & Pharma
Industrial
Technology: Plastics
Material Features: Cost Effective
High Modulus
High Stiffness
Country Availability: Canada
China (Mainland)
Mexico
USA
Plastics and Elastomers End Uses: Electrical Enclosure
Electrical Internal Frame
Electrical/Electronic Applications
Energy Management
Industrial Applications
Internal Armature
Semiconductor Applications
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

13 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield) ¹¹	48	MPa	ASTM D638
Tensile Stress (Yield) ¹¹	47	MPa	ISO 527
Tensile Stress (Break) ¹¹	45	MPa	ISO 527
Tensile Stress (Break) ¹¹	45	MPa	ASTM D638
Tensile Strain (Yield) ¹¹	9.3	%	ASTM D638
Tensile Strain (Yield) ¹¹	8.6	%	ISO 527
Tensile Strain (Break) ¹¹	13.7	%	ASTM D638
Tensile Strain (Break) ¹¹	12.8	%	ISO 527
Tensile Modulus (at 5 mm/min) ¹¹	4270	MPa	ASTM D638
Flexural Modulus ¹¹	4000	MPa	ISO 178
Flexural Modulus ¹¹	3400	MPa	ASTM D790
Tensile Modulus (at 1 mm/min) ¹¹	4050	MPa	ISO 527

6 rows

Characteristic	Value	Unit	Method
Density ¹¹	1.84	g/cm³	ASTM D792
Density ¹¹	1.83	g/cm³	ISO 1183
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	1.8	%	ISO 294
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	1.8	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	2.4	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	2.4	%	ISO 294

4 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	222	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	107	°C	ASTM D648
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	203	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	91	°C	ISO 75/Af

5 rows

Characteristic	Value	Unit	Method
Izod Impact (Unnotched, at 23°C) ¹¹	1335	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	480	J/m	ASTM D256
Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹	19	J	ASTM D3763
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	83	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80104, at 23°C) ¹¹	2.40E+01	kJ/m²	ISO 180/1A

14 rows