LNP™ ELCRIN™ 61000PUiQ2

SABIC's Specialties Business LNP ELCRIN 61000PUiQ2 (also known as ELCRIN ER011364) is based on Polycarbonate / Polybutylene Terephthalate (PC/PBT) alloy, utilizing iQ PBT generation 2 technology with 23% post consumer recycled content. Added features of this material include: excellent low temperature impact strength, improve retention of mechanical properties under UV exposure, good surface esthetics, good chemical resistance and easy flow ability.

Other characteristics

Brand: LNP™ ELCRIN
Density: 1240.0 - 1240.0 kg/m³
Polymer Name: PC/PBT Alloy
Labeling Claims: Contains PCR Resin, Recyclable, Recycled, Sustainable; Contains PCR Resin; Recyclable; Recycled; Sustainable
Melt Flow Index: 46.0 - 46.0 g/10 min
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.; ¹⁷ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card. The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Personal Care
Printing & Packaging
Flame Rating: UL 94 HB
Technology: Plastics
Additives Included: Impact Modifier
UV Stabilizer
Material Features: Chemical Resistant
Excellent Aesthetics
Good Aesthetics
Good Mechanical Properties
Good Surface Appearance
Good UV Stability
Good Weather Stability
High Flow
Country Availability: Canada
China (Mainland)
Mexico
USA
Certifications and Compliance: UL 94

Technical data

Table 1 of 7

14 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	50	MPa	ASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹	40	MPa	ASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	5	%	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	115	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	2020	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	80	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2070	MPa	ASTM D790
Tensile Stress (Yield, 50 mm/min) ¹¹	52	MPa	ISO 527
Tensile Stress (Break, 50 mm/min) ¹¹	45	MPa	ISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹	5	%	ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹	159	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	2040	MPa	ISO 527

Table 2 of 7

8 rows

Characteristic	Value	Unit	Method
Specific Gravity ¹¹	1.24	—	ASTM D792
Melt Flow Rate (at 250°C, 5 kgf) ¹¹	46	g/10 min	ASTM D1238
Density ¹¹	1.24	g/cm³	ISO 1183
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.07	%	ISO 62-4
Water Absorption (at 23°C, 24hrs) ¹¹	0.12	%	ISO 62-1
Melt Volume Rate (at 250°C, 5 kg) ¹¹	42	cm³/10 min	ISO 1133
Mold Shrinkage (flow) ᵍ ¹¹	0.9	%	SABIC method
Mold Shrinkage (xflow) ᵍ ¹¹	0.9	%	SABIC method

Table 3 of 7

11 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	80	°C	ASTM D648
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	101	°C	ASTM D648
Vicat Softening Temperature (Rate B/50) ¹¹	113	°C	ASTM D1525
Vicat Softening Temperature (Rate B/120) ¹¹	117	°C	ASTM D1525
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000086	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000088	1/°C	ASTM E831
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	73	°C	ISO 75/Af
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	98	°C	ISO 75/Bf
Relative Temperature Index (Electrical) ᵖ ¹¹	75	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	75	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	75	°C	UL 746B

Table 4 of 7

5 rows

Characteristic	Value	Unit	Method
Comparative Tracking Index (UL, PLC) ¹⁷	1	PLC Code	UL 746A
Arc Resistance (Tungsten, PLC) ¹⁷	5	PLC Code	ASTM D495
High Voltage Arc Track Rate (PLC) ¹⁷	0	PLC Code	UL 746A
Hot Wire Ignition (PLC 3) ¹⁷	min. 1.5	mm	UL 746A
High Ampere Arc Ignition (PLC 0) ¹⁷	min. 1.5	mm	UL 746A

Table 5 of 7

12 rows

Characteristic	Value	Unit	Method
Izod Impact (Notched, at 23°C) ¹¹	560	J/m	ASTM D256
Izod Impact (Notched, at 0°C) ¹¹	530	J/m	ASTM D256
Izod Impact (Notched, at -40°C) ¹¹	240	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	54	J	ASTM D3763
Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹	49	J	ASTM D3763
Instrumented Dart Impact Peak Force (at 23°C) ¹¹	5000	N	ASTM D3763
Izod Impact (Notched, 80104, at 0°C) ¹¹	40	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80104, at 23°C) ¹¹	41	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80104, at -40°C) ¹¹	17	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80104 sp=62mm) ¹¹	43	kJ/m²	ISO 179/1eA
Charpy Impact (at 0°C, V-notch Edgew 80104 sp=62mm) ¹¹	40	kJ/m²	ISO 179/1eA
Charpy Impact (at -40°C, V-notch Edgew 80104 sp=62mm) ¹¹	16	kJ/m²	ISO 179/1eA

Table 6 of 7