To catalogue

Dianhydrides & Imides 1000F3SP

Chemical Family
Polyetherimide (PEI)Polyimides (PI)

ULTEM 1000F3SP powder is a RoHS compliant polyetherimide (PEI) powder offering a glass transition temperature (Tg) of 217ºC. This FDA compliant powder is available in a spherical shape with an average particle size (D50) of 15 micron and a maximum particle size (D100) of 75 micron.

Properties

Physical Form
  • Powder
  • Solid
  • Spheres

Product families

Applications

Applications
  • Consumer Goods — Appliances & Electronics
  • Consumer Goods — Furniture
  • Consumer Goods — Stationery
  • Art & Office Supplies
Automotive & Transportation — Automotive
  • Powertrain & UTH
Industrial — Chemical & Industrial Manufacturing
  • Equipment & Parts
Electrical & Electronics — Devices & Assemblies
  • Consumer Electronics
  • Lighting
Printing & Packaging — Packaging
  • Industrial & Transport Packaging
Automotive & Transportation — Transportation
  • Aerospace & Aviation
  • Off Road & Recreational Vehicle (RV)
  • Rail & Mass Transit

Product Families

Plastics — Engineering & Specialty Polymers
  • High Performance Thermoplastics

Other characteristics

Brand
Dianhydrides & Imides
Polymer Name
Polyether Imide (PEI)
Additives Included
Flame Retardant
Processing Methods
Injection Molding, Sintering
Markets
  • Automotive & Transportation
  • Consumer Goods
  • Electrical & Electronics
  • Industrial
  • Printing & Packaging
Technology
Plastics
Labeling Claims
  • Food Contact Acceptable
  • Low Toxicity
Material Features
  • Amorphous
  • Chemical Resistant
  • Creep Resistant
  • Dimensional Stability
  • Flame Retardant
  • Food Contact Acceptable
  • High Hydrolytic Stability
  • High Stiffness
Certifications and Compliance
  • FDA Compliant
  • RoHS Compliant
Plastics and Elastomers End Uses
  • Aerospace Applications
  • Air Cabin Interior
  • Automotive Under The Hood
  • Building Materials
  • Cell Phones
  • Circuit Board
  • Commercial Appliance
  • Computer Components
Plastics and Elastomers Functions
Resin
Plastics and Elastomers Processing Methods
  • Injection Molding
  • Sintering

Technical data

Table 1 of 7

15 rows
CharacteristicValueUnitMethod
Hardness (Rockwell M)109—ASTM D785
Tensile Stress (Yield, Type I, 5 mm/min)110MPaASTM D638
Tensile Strain (Yield, Type I, 5 mm/min)7%ASTM D638
Tensile Strain (Break, Type I, 5 mm/min)60%ASTM D638
Tensile Stress (Yield, 50 mm/min)105MPaISO 527
Ball Indentation Hardness (H358/30)140MPaISO 2039-1
Tensile Modulus (at 5 mm/min)3580MPaASTM D638
Tensile Strain (Yield, 50 mm/min)6%ISO 527
Flexural Stress (Yield, 2.6 mm/min, 100 mm span)151MPaASTM D790
Tensile Strain (Break, 50 mm/min)60%ISO 527
Flexural Modulus (at 2.6 mm/min, 100 mm span)3300MPaASTM D790
Tensile Modulus (at 1 mm/min)3200MPaISO 527

Table 2 of 7

14 rows
CharacteristicValueUnitMethod
Density1.27g/cm³ISO 1183
Bulk Density0.78g/cm³ASTM D1895
Bulk Density780kg/m³ISO 1183
Mean Resin Particle Size15micrometerSABIC method
Poisson's Ratio0.36—ASTM E132
Specific Gravity1.27—ASTM D792
Mold Shrinkage (on Tensile Bar, flow)0.5 - 0.7%SABIC method
Water Absorption (at 23°C, 24hrs)0.25%ASTM D570
Water Absorption (at 23°C, saturated)1.25%ASTM D570
Water Absorption (at 23°C, saturated)1.25%ISO 62-1
Mold Shrinkage (flow, 3.2 mm)0.5 - 0.7%SABIC method
Melt Flow Rate (at 337°C, 6.6 kgf)9g/10 minASTM D1238

Table 3 of 7

12 rows
CharacteristicValueUnitMethod
Vicat Softening Temperature (Rate B/50)211°CISO 306
Vicat Softening Temperature (Rate B/50)218°CASTM D1525
Heat Deflection Temperature (at 0.45 MPa, 6.4 mm, Unannealed)210°CASTM D648
Coefficient of Thermal Expansion (at 23°C to 150°C, flow)5.00E-051/°CISO 11359-2
Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed)201°CASTM D648
Coefficient of Thermal Expansion (at -20°C to 150°C, flow)0.00005581/°CASTM E831
Coefficient of Thermal Expansion (at 23°C to 150°C, xflow)0.000051/°CISO 11359-2
Coefficient of Thermal Expansion (at -20°C to 150°C, xflow)0.0000541/°CASTM E831
Heat Deflection Temperature/Be (at 0.45MPa, Edgew 120*10*4, sp=100mm)200°CISO 75/Be
Heat Deflection Temperature/Ae (at 1.8 Mpa, Edgew 120*10*4, sp=100mm)190°CISO 75/Ae
Thermal Conductivity0.22W/m-°CASTM C177
Thermal Conductivity0.24W/m-°CISO 8302

Table 4 of 7

15 rows
CharacteristicValueUnitMethod
Relative Permittivity (1 MHz)2.9—IEC 60250
Relative Permittivity (1 kHz)3.15—ASTM D150
Relative Permittivity (50/60 Hz)2.9—IEC 60250
Volume Resistivity1.00E+15Ω.cmIEC 60093
Volume Resistivity1.00E+17Ω.cmASTM D257
Dielectric Strength (in air, at 1.6mm)32.7kV/mmASTM D149
Dielectric Strength (in oil, at 0.8mm)33kV/mmIEC 60243-1
Dielectric Strength (in oil, at 1.6mm)25kV/mmIEC 60243-1
Dielectric Strength (in oil, at 1.6mm)28kV/mmASTM D149
Dielectric Strength (in oil, at 3.2mm)16kV/mmIEC 60243-1
Dissipation Factor (at at 1 kHz)0.0013—ASTM D150
Dissipation Factor (at 2450 MHz)0.0025—ASTM D150

Table 5 of 7

5 rows
CharacteristicValueUnitMethod
Izod Impact (Unnotched, at 23°C)1335J/mASTM D4812
Color (at 23°C)36JASTM D3029
Izod Impact (Notched, at 23°C)53J/mASTM D256
Izod Impact (Unnotched, 80*10*4, at 23°C)No breakkJ/m²ISO 180/1U
Izod Impact (Notched, 80*10*4, at 23°C)6kJ/m²ISO 180/1A

Table 6 of 7

14 rows
CharacteristicValueUnit
Back Pressure0.3 - 0.7MPa
Drying Temperature150°C
Drying Time4 - 6Hrs
Drying Time (Cumulative)24Hrs
Front - Zone 3 Temperature345 - 400°C
Maximum Moisture Content0.02%
Melt Temperature350 - 400°C
Middle - Zone 2 Temperature340 - 400°C
Mold Temperature135 - 165°C
Nozzle Temperature345 - 400°C
Rear - Zone 1 Temperature330 - 400°C
Screw Speed40 - 70rpm

Table 7 of 7

2 rows
CharacteristicValueUnitMethod
Oxygen Index (LOI)47%ASTM D2863
Oxygen Index (LOI)47%ISO 4589

More products by SABIC's Specialties Business

The Omnichem website uses cookies. By continuing to use the site, you consent to their use in accordance with our Privacy Policy and to the collection of analytics.