To catalogue
ULTEM™ Resin ATX200R
- Chemical Family
- Polyetherimide (PEI)Polyimides (PI)
SABIC's Specialties Business High flow Polyetherimide blend with internal mold release. ECO Conforming, UL94 V0 Listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Product families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Other characteristics
- Brand
- ULTEM™ Resin
- Polymer Name
- Polyether Imide (PEI)
- Additives Included
Flame Retardant, Heat Stabilizer, Mold Release Agent, Plasticizer (Polycarboxylate)
- Processing Methods
- Injection Molding
- Note
ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.. ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Printing & Packaging
- Availability
ULTEM™ resin is available in transparent and opaque custom colors, and can be glass filled for added stiffness.
- Flame Rating
- UL 94 V0
- UL 94 V2
- Key Benefits
- Heat Resistance
- Dimensional Stability
- Dielectric Performance
- Miniaturization and Thin Wall
- Resilience
- Technology
- Plastics
- Labeling Claims
- Bio-based
- Confirms to ECO-Label
- Low Toxicity
- No Added PFAS
Technical data
Table 1 of 7
18 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Yield, Type I, 5 mm/min) | 96 | MPa | ASTM D638 |
| Tensile Strain (Break, Type I, 5 mm/min) | 70 | % | ASTM D638 |
| Tensile Stress (Break, Type I, 5 mm/min) | 85 | MPa | ASTM D638 |
| Flexural Stress (Yield, 2.6 mm/min, 100 mm span) | 144 | MPa | ASTM D790 |
| Tensile Strain (Yield, Type I, 5 mm/min) | 7 | % | ASTM D638 |
| Flexural Modulus (at 2.6 mm/min, 100 mm span) | 3170 | MPa | ASTM D790 |
| Tensile Modulus (at 5 mm/min) | 3300 | MPa | ASTM D638 |
| Flexural Stress (Yield, 1.3 mm/min, 50 mm span) | 145 | MPa | ASTM D790 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) | 3170 | MPa | ASTM D790 |
| Taber Abrasion (CS-17, 1 kg) | 20 | mg/1000cy | SABIC method |
| Tensile Stress (Yield, 50 mm/min) | 95 | MPa | ISO 527 |
| Tensile Stress (Break, 50 mm/min) | 75 | MPa | ISO 527 |
Table 2 of 7
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mold Shrinkage (flow, 3.2 mm) | 0.5 - 0.7 | % | SABIC method |
| Melt Flow Rate (at 337°C, 6.6 kgf) | 26.5 | g/10 min | ASTM D1238 |
| Specific Gravity | 1.26 | — | ASTM D792 |
| Mold Shrinkage (on Tensile Bar, flow) | 0.5 - 0.7 | % | SABIC method |
| Mold Shrinkage (xflow, 3.2 mm) | 0.5 - 0.7 | % | SABIC method |
| Density | 1.26 | g/cm³ | ISO 1183 |
| Water Absorption (at 23°C, saturated) | 0.9 | % | ISO 62-1 |
| Moisture Absorption (at 23°C, 50% RH) | 0.5 | % | ISO 62 |
| Melt Volume Rate (at 340°C, 5.0 kg) | 16 | cm³/10 min | ISO 1133 |
Table 3 of 7
17 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) | 190 | °C | ASTM D648 |
| Relative Temperature Index (Electrical) ᵖ | 115 | °C | UL 746B |
| Relative Temperature Index (Mechanical with impact) ᵖ | 115 | °C | UL 746B |
| Relative Temperature Index (Mechanical without impact) ᵖ | 115 | °C | UL 746B |
| Vicat Softening Temperature (Rate B/50) | 200 | °C | ISO 306 |
| Vicat Softening Temperature (Rate B/50) | 209 | °C | ASTM D1525 |
| Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) | 187 | °C | ASTM D648 |
| Coefficient of Thermal Expansion (at -40°C to 150°C, flow) | 0.00005 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 150°C, xflow) | 0.00005 | 1/°C | ASTM E831 |
| Thermal Conductivity | 0.23 | W/m-°C | ISO 8302 |
| Coefficient of Thermal Expansion (at 23°C to 150°C, flow) | 0.00005 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at 23°C to 150°C, xflow) | 0.00005 | 1/°C | ISO 11359-2 |
Table 4 of 7
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Comparative Tracking Index (UL, PLC) | 4 | PLC Code | UL 746A |
| Hot Wire Ignition (PLC 0) | min. 0.75 | mm | UL 746A |
| High Ampere Arc Ignition (PLC 4) | min. 0.75 | mm | UL 746A |
| Volume Resistivity | 1.00E+15 | Ω.cm | IEC 60093 |
| Surface Resistivity (ROA) | min. 1.E+15 | Ω | IEC 60093 |
| Relative Permittivity (1 MHz) | 2.9 | — | IEC 60250 |
| Dissipation Factor (at 50/60 Hz) | 0.001 | — | IEC 60250 |
| Dissipation Factor (at at 1 MHz) | 0.005 | — | IEC 60250 |
| Comparative Tracking Index ʳ | 150 | V | IEC 60112 |
| Relative Permittivity (50/60 Hz) | 2.9 | — | IEC 60250 |
Table 5 of 7
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched, at 23°C) | 53 | J/m | ASTM D256 |
| Izod Impact (Reverse Notched, 3.2 mm) | 2136 | J/m | ASTM D256 |
| Izod Impact (Unnotched, at 23°C) | 2083 | J/m | ASTM D4812 |
| Izod Impact (Notched, at -30°C) | 55 | J/m | ASTM D256 |
| Instrumented Dart Impact Total Energy (at 23°C) | 50 | J | ASTM D3763 |
| Izod Impact (Notched, 80*10*4, at 23°C) | 5 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*4, at -30°C) | 5 | kJ/m² | ISO 180/1A |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) | 4 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at -30°C, V-notch Edgew 80*10*4 sp=62mm) | 4 | kJ/m² | ISO 179/1eA |
Table 6 of 7
23 rows| Characteristic | Value | Unit |
|---|---|---|
| Back Pressure | 0.3 - 0.7 | MPa |
| Drying Temperature | 135 | °C |
| Drying Temperature | 130 - 140 | °C |
| Drying Time | 3 - 4 | Hrs |
| Drying Time | 4 - 6 | Hrs |
| Drying Time (Cumulative) | 10 | Hrs |
| Front - Zone 3 Temperature | 340 - 360 | °C |
| Front - Zone 3 Temperature | 350 - 370 | °C |
| Maximum Moisture Content | 0.02 | % |
| Melt Temperature | 350 - 370 | °C |
| Melt Temperature | 340 - 380 | °C |
| Middle - Zone 2 Temperature | 345 - 365 | °C |
Table 7 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| UL Recognized (94V-0 Flame Class Rating) ᵖ | min. 1.5 | mm | UL 94 |
| UL Recognized (94V-2 Flame Class Rating) ᵖ | min. 0.75 | mm | UL 94 |
