LNP™ VERTON™ Compound RV00AEU

Chemical Family: Polyamides

LNP™ VERTON™ Compound RV00AEU is crafted from polyamide 66 (nylon 66) resin with 50% long glass fiber content, offering exceptional properties for structural applications. This compound combines easy molding capabilities with UV stabilization, ensuring prolonged durability and performance under outdoor conditions. It is designed to meet the high demands of various industries including automotive, industrial, and consumer goods. LNP™ VERTON™ Compound RV00AEU delivers high stiffness and strength, making it ideal for components where both mechanical robustness and esthetic appeal are essential.

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Sports & Recreation

Automotive & Transportation — Automotive

Exterior & Body

Building & Construction — Building Materials

Structural Components

Electrical & Electronics — Devices & Assemblies

Industrial Automation

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Other characteristics

Brand: LNP™ VERTON™ Compound
Polymer Name: Polyamide 66 (PA 66)
Fillers Included: Glass Fiber
Processing Methods: Injection Molding
Note: (1) The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. (2) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article. (3) Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
Markets: Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Technology: Plastics
Labeling Claims: No Added PFAS
Material Features: Easy To Mold
Good Processability
Good UV Stability
Good Weather Stability
High Stiffness
High Strength
UV Stabilized
Plastics and Elastomers End Uses: Automotive Exterior Parts
Building Materials
Commercial Appliance
Home Appliances
Sporting Goods
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 5

8 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, 5 mm/min) ¹	276.0	MPa	ISO 527
Tensile Stress (Break, 5 mm/min) ¹	276.0	MPa	ISO 527
Tensile Strain (Yield, 5 mm/min) ¹	2.0	%	ISO 527
Tensile Strain (Break, 5 mm/min) ¹	2.0	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹	17800.0	MPa	ISO 527
Flexural Stress (Yield, 2 mm/min) ¹	366.0	MPa	ISO 178
Flexural Strain (Break, 2 mm/min) ¹	3.0	%	ISO 178
Flexural Modulus (at 2 mm/min) ¹	15000.0	MPa	ISO 178

Table 2 of 5

4 rows

Characteristic	Value	Unit	Method
Mold Shrinkage (flow, 24 hrs) ²	0.15 - 0.35	%	ISO 294
Mold Shrinkage (xflow, 24 hrs) ²	0.8	%	ISO 294
Density ¹	1.6	g/cm³	ISO 1183
Water Absorption (23°C/24hrs) ¹	0.9	%	ISO 62-1

Table 3 of 5

2 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature/Bf (0.45 MPa Flatw 80104 sp=64mm) ¹	259.0	°C	ISO 75/Bf
Heat Deflection Temperature/Af (1.8 MPa Flatw 80104 sp=64mm) ¹	256.0	°C	ISO 75/Af

Table 4 of 5