LNP™ VERTON™ Compound RV00CES
- Chemical Family
- Polyamides
LNP™ VERTON™ Compound RV00CES utilizes Polyamide 66 (nylon 66) resin with 60% long glass fiber, enhancing its structural strength. This compound is designed for ease of molding, ensuring efficient production processes. It also features heat stabilization, making it suitable for applications requiring dimensional stability and performance under elevated temperatures. LNP™ VERTON™ Compound RV00CES is ideal for various industrial uses where robust mechanical properties and reliable performance are essential, such as automotive components, electrical enclosures, and structural parts. Its high glass fiber content contributes to superior stiffness and impact resistance, ensuring durability in demanding environments. This compound offers manufacturers a reliable solution for achieving both functional and esthetic requirements in their products.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Sports & Recreation
- Exterior & Body
- Structural Components
- Industrial Automation
Product Families
- Polyamides
Other characteristics
- Brand
- LNP™ VERTON™ Compound
- Polymer Name
- Polyamide 66 (PA 66)
- Fillers Included
- Glass Fiber
- Processing Methods
- Injection Molding
- Note
(1) The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. (2) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article. (3) Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Material Features
- Easy To Mold
- Good Processability
- Heat Stabilized
- High Stiffness
- High Strength
- Plastics and Elastomers End Uses
- Automotive Exterior Parts
- Building Materials
- Commercial Appliance
- Home Appliances
- Sporting Goods
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strain (Break) ¹ | 1.6 | % | ISO 527 |
| Tensile Strain (Break) ¹ | 1.6 | % | ASTM D638 |
| Tensile Modulus (at 5 mm/min) ¹ | 19650.0 | MPa | ASTM D638 |
| Flexural Stress ¹ | 433.0 | MPa | ISO 178 |
| Flexural Stress ¹ | 430.0 | MPa | ASTM D790 |
| Flexural Modulus ¹ | 18920.0 | MPa | ISO 178 |
| Flexural Modulus ¹ | 18020.0 | MPa | ASTM D790 |
| Tensile Stress (Break) ¹ | 261.0 | MPa | ISO 527 |
| Tensile Stress (Break) ¹ | 270.0 | MPa | ASTM D638 |
| Tensile Modulus (at 1 mm/min) ¹ | 23280.0 | MPa | ISO 527 |
Table 2 of 5
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹ | 1.71 | g/cm³ | ISO 1183 |
| Density ¹ | 1.71 | g/cm³ | ASTM D792 |
| Moisture Absorption (23°C/50% RH/24 hrs) ¹ | 0.44 | % | ASTM D570 |
| Mold Shrinkage (flow, 24 hrs) ² | 0.2 | % | ASTM D955 |
| Mold Shrinkage (flow, 24 hrs) ² | 0.2 | % | ISO 294 |
| Mold Shrinkage (xflow, 24 hrs) ² | 0.4 | % | ASTM D955 |
| Mold Shrinkage (xflow, 24 hrs) ² | 0.4 | % | ISO 294 |
Table 3 of 5
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹ | 247.0 | °C | ASTM D648 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 1.7e-05 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 1.76e-05 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 5.3e-05 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 5.36e-05 | 1/°C | ASTM E831 |
| Heat Deflection Temperature/Bf (0.45 MPa Flatw 80*10*4 sp=64mm) ¹ | 252.0 | °C | ISO 75/Bf |
| Heat Deflection Temperature/Af (1.8 MPa Flatw 80*10*4 sp=64mm) ¹ | 252.0 | °C | ISO 75/Af |
Table 4 of 5
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched, 23°C) ¹ | 411.0 | J/m | ASTM D256 |
| Instrumented Dart Impact Energy (at peak, 23°C) ¹ | 18.0 | J | ASTM D3763 |
| Multiaxial Impact ¹ | 18.0 | J | ISO 6603 |
| Izod Impact (Unnotched 80*10*4 +23°C) ¹ | 102.0 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched 80*10*4 +23°C) ¹ | 54.0 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched 80*10*4 -40°C) ¹ | 43.0 | kJ/m² | ISO 180/1A |
Table 5 of 5
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ³ | 80.0 | °C |
| Drying Time ³ | 4.0 | Hrs |
| Maximum Moisture Content ³ | 0.15 - 0.25 | % |
| Melt Temperature ³ | 290 - 305 | °C |
| Front - Zone 3 Temperature ³ | 290 - 300 | °C |
| Middle - Zone 2 Temperature ³ | 290 - 300 | °C |
| Rear - Zone 1 Temperature ³ | 280 - 295 | °C |
| Mold Temperature ³ | 95 - 110 | °C |
| Back Pressure ³ | 0.2 - 0.3 | MPa |
| Screw Speed ³ | 30 - 60 | rpm |
