LNP™ VERTON™ Compound UX03320
- Chemical Family
- Polyamides
LNP™ VERTON™ Compound UX03320 is formulated with Polyphthalamide (PPA) resin featuring 50% long glass fiber and proprietary fillers, emphasizing structural integrity. This compound is engineered to provide exceptional strength and durability, making it suitable for applications where robust mechanical performance is essential. Its composition ensures reliable performance under demanding conditions, offering resistance to deformation and maintaining dimensional stability over time. LNP™ VERTON™ Compound UX03320 is ideal for use in automotive, industrial, and electrical components where high strength-to-weight ratio and reliability are critical, ensuring longevity and performance in challenging environments.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Sports & Recreation
- Exterior & Body
- Structural Components
- Industrial Automation
Product Families
- Polyamides
Other characteristics
- Brand
- LNP™ VERTON™ Compound
- Polymer Name
- Polyphthalamide (PPA)
- Fillers Included
- Glass Fiber, Proprietary
- Glass Fiber
- Proprietary
- Processing Methods
- Injection Molding
- Note
(1) The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. (2) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article. (3) UL Ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card. (4) Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Material Features
- High Stiffness
- High Strength
- Wear Resistant
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Automotive Exterior Parts
- Building Materials
- Commercial Appliance
- Home Appliances
- Sporting Goods
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strain (Break) ¹ | 1.9 | % | ASTM D638 |
| Tensile Strain (Break) ¹ | 1.9 | % | ISO 527 |
| Tensile Modulus (at 5 mm/min) ¹ | 18200.0 | MPa | ASTM D638 |
| Flexural Stress ¹ | 300.0 | MPa | ASTM D790 |
| Flexural Modulus ¹ | 18000.0 | MPa | ASTM D790 |
| Tensile Stress (Break) ¹ | 200.0 | MPa | ISO 527 |
| Tensile Stress (Break) ¹ | 220.0 | MPa | ASTM D638 |
| Tensile Modulus (at 1 mm/min) ¹ | 20300.0 | MPa | ISO 527 |
| Flexural Stress (Break, 2 mm/min) ¹ | 360.0 | MPa | ISO 178 |
| Flexural Modulus (at 2 mm/min) ¹ | 17700.0 | MPa | ISO 178 |
Table 2 of 6
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹ | 1.63 | g/cm³ | ASTM D792 |
| Density ¹ | 1.63 | g/cm³ | ISO 1183 |
| Moisture Absorption (23°C/50% RH/24 hrs) ¹ | 0.2 | % | ASTM D570 |
| Mold Shrinkage (flow, 24 hrs) ² | 0.05 - 0.1 | % | ASTM D955 |
| Mold Shrinkage (flow, 24 hrs) ² | 0.06 | % | ISO 294 |
| Mold Shrinkage (xflow, 24 hrs) ² | 0.08 - 0.2 | % | ASTM D955 |
| Mold Shrinkage (xflow, 24 hrs) ² | 0.15 | % | ISO 294 |
| Spiral Flow (1mm) ¹ | 30.0 | cm | SABIC method |
| Spiral Flow (3mm) ¹ | 70.0 | cm | SABIC method |
| Moisture Absorption (23°C / 50% RH) ¹ | 0.3 | % | ISO 62 |
Table 3 of 6
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹ | 260.0 | °C | ASTM D648 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 1.2e-05 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 1.2e-05 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 2.2e-05 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 2.2e-05 | 1/°C | ISO 11359-2 |
| Heat Deflection Temperature/Af (1.8 MPa Flatw 80*10*4 sp=64mm) ¹ | 275.0 | °C | ISO 75/Af |
Table 4 of 6
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Unnotched, 23°C) ¹ | 800.0 | J/m | ASTM D4812 |
| Izod Impact (Notched, 23°C) ¹ | 300.0 | J/m | ASTM D256 |
| Multiaxial Impact ¹ | 19.0 | J | ISO 6603 |
| Instrumented Dart Impact Total Energy (at 23°C) ¹ | 15.0 | J | ASTM D3763 |
| Izod Impact (Unnotched 80*10*4 +23°C) ¹ | 70.0 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched 80*10*4 +23°C) ¹ | 38.0 | kJ/m² | ISO 180/1A |
Table 5 of 6
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁴ | 120 - 150 | °C |
| Drying Time ⁴ | 4.0 | Hrs |
| Maximum Moisture Content ⁴ | 0.15 | % |
| Melt Temperature ⁴ | 315 - 330 | °C |
| Front - Zone 3 Temperature ⁴ | 330 - 345 | °C |
| Middle - Zone 2 Temperature ⁴ | 320 - 330 | °C |
| Rear - Zone 1 Temperature ⁴ | 315 - 325 | °C |
| Mold Temperature ⁴ | 140 - 165 | °C |
| Back Pressure ⁴ | 0.2 - 0.3 | MPa |
| Screw Speed ⁴ | 30 - 60 | rpm |
Table 6 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| UL Recognized 94HB Flame Class Rating ³ | min. 0.8 | mm | UL 94 |
