LNP™ VERTON™ Compound WV006
- Chemical Family
- Polyesters
LNP™ VERTON™ Compound WV006 is based on Polybutylene Terephthalate (PBT) resin with 30% long glass fiber, designed for structural applications. This compound combines the strength of PBT with the reinforcement of long glass fibers, offering excellent mechanical properties such as high stiffness and impact resistance. LNP™ VERTON™ Compound WV006 is ideal for use in components where dimensional stability and reliability under load are critical, ensuring longevity and performance in various industrial and automotive applications.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Sports & Recreation
- Exterior & Body
- Structural Components
- Industrial Automation
Product Families
- Polyesters & Copolyesters
Other characteristics
- Brand
- LNP™ VERTON™ Compound
- Polymer Name
- Polybutylene Terephthalate (PBT)
- Fillers Included
- Glass Fiber
- Flexural Modulus
- 9780.0 - 9780.0 MPa
- Processing Methods
- Injection Molding
- Note
(1) The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. (2) Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Material Features
- High Stiffness
- High Strength
- Plastics and Elastomers End Uses
- Automotive Exterior Parts
- Building Materials
- Commercial Appliance
- Home Appliances
- Sporting Goods
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Break) ¹ | 187.0 | MPa | ISO 527 |
| Tensile Strain (Break) ¹ | 2.0 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹ | 11570.0 | MPa | ISO 527 |
| Flexural Stress ¹ | 247.0 | MPa | ISO 178 |
| Flexural Modulus ¹ | 9780.0 | MPa | ISO 178 |
Table 2 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹ | 1.54 | g/cm³ | ISO 1183 |
Table 3 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature/Af (1.8 MPa Flatw 80*10*4 sp=64mm) ¹ | 225.0 | °C | ISO 75/Af |
Table 4 of 5
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Unnotched 80*10*4 +23°C) ¹ | 56.0 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched 80*10*4 +23°C) ¹ | 30.0 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched 80*10*4 -40°C) ¹ | 36.0 | kJ/m² | ISO 180/1A |
Table 5 of 5
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ² | 120.0 | °C |
| Drying Time ² | 4.0 | Hrs |
| Maximum Moisture Content ² | 0.05 | % |
| Melt Temperature ² | 250 - 260 | °C |
| Front - Zone 3 Temperature ² | 250 - 260 | °C |
| Middle - Zone 2 Temperature ² | 240 - 250 | °C |
| Rear - Zone 1 Temperature ² | 230 - 245 | °C |
| Mold Temperature ² | 65 - 120 | °C |
| Back Pressure ² | 0.2 - 0.3 | MPa |
| Screw Speed ² | 30 - 70 | rpm |
