LNP™ STAT-KON™ Compound KE005
- Chemical Family
- Acetals
LNP™ STAT-KON™ Compound KE005 is based on POM (acetal) copolymer resin with 25% carbon fiber, ensuring it is electrically conductive. This grade is characterized by high stiffness and strength, making it ideal for applications in electrical components and infrastructure, as well as material handling. It offers robust performance in document handling, monitoring, and imaging applications.
Product families
- Polyacetals
Other characteristics
- Brand
- LNP™ STAT-KON™ Compound
- Polymer Name
- Polyacetal Copolymer (POM)
- Fillers Included
- Carbon Fiber
- Processing Methods
- Injection Molding
- Note
¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. ² Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article. ³ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Material Features
- Electrically Conductive
- High Stiffness
- High Strength
- No Added PFAS
- Plastics and Elastomers End Uses
- Electrical Components
- Electronic Material Handling
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Break) ¹ | 100.0 | MPa | ASTM D638 |
| Tensile Stress (Break) ¹ | 90.0 | MPa | ISO 527 |
| Tensile Strain (Break) ¹ | 0.9 | % | ASTM D638 |
| Tensile Strain (Break) ¹ | 1.0 | % | ISO 527 |
| Tensile Modulus (at 5 mm/min) ¹ | 15500.0 | MPa | ASTM D638 |
| Flexural Stress ¹ | 130.0 | MPa | ASTM D790 |
| Flexural Stress ¹ | 125.0 | MPa | ISO 178 |
| Flexural Modulus ¹ | 15000.0 | MPa | ASTM D790 |
| Flexural Modulus ¹ | 15000.0 | MPa | ISO 178 |
| Tensile Modulus (at 1 mm/min) ¹ | 13300.0 | MPa | ISO 527 |
Table 2 of 6
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹ | 1.46 | g/cm³ | ASTM D792 |
| Density ¹ | 1.46 | g/cm³ | ISO 1183 |
| Water Absorption (23°C/24hrs) ¹ | 0.3 - 0.5 | % | ASTM D570 |
| Mold Shrinkage (xflow) ¹ | 0.9 - 1.1 | % | SABIC method |
| Mold Shrinkage (flow) ¹ | 0.3 - 0.5 | % | SABIC method |
| Melt Volume Rate (at 190°C/5.0 kg) ¹ | 6 - 10 | cm³/10 min | ISO 1133 |
Table 3 of 6
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, 3.2 mm, unannealed) ¹ | 163.0 | °C | ASTM D648 |
| Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹ | 161.0 | °C | ASTM D648 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 1.0e-05 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 1.0e-05 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 0.0001 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 0.0001 | 1/°C | ISO 11359-2 |
| Vicat Softening Temperature (at Rate A/120) ¹ | 164.0 | °C | ASTM D1525 |
| Vicat Softening Temperature (at Rate A/120) ¹ | 164.0 | °C | ISO 306 |
| Vicat Softening Temperature (at Rate B/120) ¹ | 154.0 | °C | ASTM D1525 |
| Vicat Softening Temperature (at Rate B/120) ¹ | 154.0 | °C | ISO 306 |
| Heat Deflection Temperature/Bf (0.45 MPa Flatw 80*10*4 sp=64mm) ¹ | 165.0 | °C | ISO 75/Bf |
| Heat Deflection Temperature/Af (1.8 MPa Flatw 80*10*4 sp=64mm) ¹ | 162.0 | °C | ISO 75/Af |
Table 4 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Surface Resistivity ¹ | 1.0E+01 - 1.0E+03 | Ω | IEC 60093 |
| Surface Resistivity ² | 1.0E+01 - 1.0E+03 | Ω | ASTM D257 |
Table 5 of 6
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Unnotched, 23°C) ¹ | 230.0 | J/m | ASTM D4812 |
| Izod Impact (Notched, 23°C) ¹ | 170.0 | J/m | ASTM D256 |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹ | 4.4 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹ | 14.0 | kJ/m² | ISO 179/1eU |
| Izod Impact (Unnotched 80*10*4 +23°C) ¹ | 5.8 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched 80*10*4 +23°C) ¹ | 14.0 | kJ/m² | ISO 180/1A |
Table 6 of 6
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ³ | 80.0 | °C |
| Drying Time ³ | 4.0 | Hrs |
| Melt Temperature ³ | 200 - 215 | °C |
| Front - Zone 3 Temperature ³ | 210 - 220 | °C |
| Middle - Zone 2 Temperature ³ | 195 - 205 | °C |
| Rear - Zone 1 Temperature ³ | 175 - 190 | °C |
| Mold Temperature ³ | 80 - 110 | °C |
| Back Pressure ³ | 0.2 - 0.3 | MPa |
| Screw Speed ³ | 30 - 60 | rpm |
