LNP™ STAT-KON™ Compound ZD000XXR
- Chemical Family
- PolyethersStyrenics
LNP™ STAT-KON™ Compound ZD000XXR is based on polyphenylene ether/polystyrene (ppe/ps) blend, formulated to be electrically conductive while offering improved toughness and reduced carbon sloughing. This grade is specifically designed for applications in the semiconductor industry, such as IC trays and packaging. It features low warpage, dimensional stability, and does not contain intentionally added PFAS. Ideal for material handling applications, it is processed via injection molding to meet stringent industry requirements.
Product families
Applications
- Semiconductor Manufacturing
Product Families
- Blends & Alloys
Other characteristics
- Brand
- LNP™ STAT-KON™ Compound
- Density
- 1170.0 - 1170.0 kg/m³
- Polymer Name
- PPE/PS Alloy
- Flexural Modulus
- 3245.0 - 3245.0 MPa
- Processing Methods
- Injection Molding
- Note
¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. ² Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article. ³ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- Markets
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Fillers Included
- Carbon Powder
- Material Features
- Dimensional Stability
- Electrically Conductive
- Improved Toughness
- Low Warpage
- No Added PFAS
- Plastics and Elastomers End Uses
- IC Tray
- Semiconductor Applications
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Break, Type I, 50 mm/min) ¹ | 60.3 | MPa | ASTM D638 |
| Tensile Strain (Break, Type I, 50 mm/min) ¹ | 5.2 | % | ASTM D638 |
| Tensile Modulus (at 50 mm/min) ¹ | 3195.0 | MPa | ASTM D638 |
| Flexural Strength (1.3 mm/min, 50 mm span) ¹ | 107.0 | MPa | ASTM D790 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹ | 3040.0 | MPa | ASTM D790 |
| Tensile Stress (Break, 50 mm/min) ¹ | 59.1 | MPa | ISO 527 |
| Tensile Strain (Break, 50 mm/min) ¹ | 4.86 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹ | 3077.0 | MPa | ISO 527 |
| Flexural Strength (2 mm/min) ¹ | 107.0 | MPa | ISO 178 |
| Flexural Modulus (at 2 mm/min) ¹ | 3245.0 | MPa | ISO 178 |
Table 2 of 6
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity ¹ | 1.17 | — | ASTM D792 |
| Melt Volume Rate (at 300°C/10.0 kg) ¹ | 7.57 | cm³/10 min | ISO 1133 |
| Mold Shrinkage (flow) ² | 0.78 | % | SABIC method |
| Mold Shrinkage (xflow) ² | 0.74 | % | SABIC method |
Table 3 of 6
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, 3.2 mm, unannealed) ¹ | 177.0 | °C | ASTM D648 |
| Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹ | 165.0 | °C | ASTM D648 |
| Heat Deflection Temperature/Bf (0.45 MPa Flatw 80*10*4 sp=64mm) ¹ | 176.0 | °C | ISO 75/Bf |
| Heat Deflection Temperature/Af (1.8 MPa Flatw 80*10*4 sp=64mm) ¹ | 162.0 | °C | ISO 75/Af |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 6.4e-05 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 6.0e-05 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 7.6e-05 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 7.6e-05 | 1/°C | ISO 11359-2 |
| Vicat Softening Temperature (at Rate A/50) ¹ | 193.0 | °C | ASTM D1525 |
| Vicat Softening Temperature (at Rate B/50) ¹ | 182.0 | °C | ISO 306 |
Table 4 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Surface Resistivity ¹ | 1600000.0 | Ω | ASTM D257 |
| Volume Resistivity ¹ | 7200000.0 | Ω.cm | ASTM D257 |
Table 5 of 6
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched, 23°C) ¹ | 77.5 | J/m | ASTM D256 |
| Izod Impact (Unnotched, 23°C) ¹ | 1020.0 | J/m | ASTM D4812 |
| Izod Impact (Notched 80*10*4 +23°C) ¹ | 6.68 | kJ/m² | ISO 180/1A |
| Izod Impact (Unnotched 80*10*4 +23°C) ¹ | 43.91 | kJ/m² | ISO 180/1U |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹ | 6.6 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹ | 61.4 | kJ/m² | ISO 179/1eU |
Table 6 of 6
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ³ | 110 - 120 | °C |
| Drying Time ³ | 3 - 5 | Hrs |
| Melt Temperature ³ | 300 - 310 | °C |
| Nozzle Temperature ³ | 300 - 310 | °C |
| Front - Zone 3 Temperature ³ | 300 - 310 | °C |
| Middle - Zone 2 Temperature ³ | 300 - 310 | °C |
| Rear - Zone 1 Temperature ³ | 300 - 310 | °C |
| Mold Temperature ³ | 110 - 130 | °C |
| Back Pressure ³ | 0.1 - 0.3 | MPa |
| Screw Speed ³ | 90 - 110 | rpm |
