LNP™ VERTON™ Compound PX06418
- Chemical Family
- Polyamides
LNP™ VERTON™ Compound PX06418 blends Polyamide 6 (Nylon 6) resin with 35% long glass fiber and proprietary fillers, focusing on heat stabilization and structural integrity. Designed for demanding applications in automotive exteriors, building components, and various industrial sectors, this compound offers high stiffness and strength without intentional PFAS additives. Its formulation includes both glass fiber and proprietary fillers, ensuring robust performance and durability during injection molding. LNP™ VERTON™ Compound PX06418 is ideal for sport and leisure equipment, home appliances, and commercial appliances where reliability and endurance are crucial.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Sports & Recreation
- Exterior & Body
- Equipment & Parts
- Consumer Electronics
Product Families
- Polyamides
Other characteristics
- Brand
- LNP™ VERTON™ Compound
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Fiber
- Flexural Modulus
- 9530.0 - 9530.0 MPa
- Processing Methods
- Injection Molding
- Note
¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. ² Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article. ³ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Industrial
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Material Features
- Heat Stabilized
- High Stiffness
- High Strength
- Plastics and Elastomers End Uses
- Automotive Applications
- Commercial Appliance
- Construction Applications
- Home Appliances
- Water Management
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Break, Type I, 5 mm/min) ¹ | 203.0 | MPa | ASTM D638 |
| Tensile Strain (Break, Type I, 5 mm/min) ¹ | 2.5 | % | ASTM D638 |
| Tensile Modulus (at 5 mm/min) ¹ | 11960.0 | MPa | ASTM D638 |
| Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹ | 309.0 | MPa | ASTM D790 |
| Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹ | 307.0 | MPa | ASTM D790 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹ | 10000.0 | MPa | ASTM D790 |
| Tensile Stress (Yield, 5 mm/min) ¹ | 193.0 | MPa | ISO 527 |
| Tensile Stress (Break, 5 mm/min) ¹ | 182.0 | MPa | ISO 527 |
| Tensile Strain (Break, 5 mm/min) ¹ | 2.6 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹ | 10900.0 | MPa | ISO 527 |
| Flexural Strength (2 mm/min) ¹ | 290.0 | MPa | ISO 178 |
| Flexural Modulus (at 2 mm/min) ¹ | 9530.0 | MPa | ISO 178 |
Table 2 of 5
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity ¹ | 1.41 | — | ASTM D792 |
| Density ¹ | 1.4 | g/cm³ | ASTM D792 |
| Moisture Absorption (23°C/50% RH/24 hrs) ¹ | 1.1 | % | ASTM D570 |
| Moisture Absorption (23°C / 50% RH) ¹ | 1.7 | % | ISO 62 |
| Mold Shrinkage (flow, 24 hrs) ² | 0.1 - 0.3 | % | ASTM D955 |
| Mold Shrinkage (xflow, 24 hrs) ² | 0.4 - 0.6 | % | ASTM D955 |
Table 3 of 5
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, 3.2 mm, unannealed) ¹ | 213.0 | °C | ASTM D648 |
| Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹ | 208.0 | °C | ASTM D648 |
| Coefficient of Thermal Expansion (at -30°C to 30°C, flow) ¹ | 4.8e-05 | 1/°C | ASTM D696 |
| Coefficient of Thermal Expansion (at -30°C to 30°C, xflow) ¹ | 0.00011 | 1/°C | ASTM D696 |
| Heat Deflection Temperature/Bf (0.45 MPa Flatw 80*10*4 sp=64mm) ¹ | 213.0 | °C | ISO 75/Bf |
| Heat Deflection Temperature/Af (1.8 MPa Flatw 80*10*4 sp=64mm) ¹ | 207.0 | °C | ISO 75/Af |
Table 4 of 5
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Unnotched, 23°C) ¹ | 1040.0 | J/m | ASTM D4812 |
| Izod Impact (Notched, 23°C) ¹ | 284.0 | J/m | ASTM D256 |
| Multiaxial Impact ¹ | 5.0 | J | ISO 6603 |
| Instrumented Dart Impact Total Energy (at 23°C) ¹ | 15.0 | J | ASTM D3763 |
| Izod Impact (Unnotched 80*10*4 +23°C) ¹ | 64.0 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched 80*10*4 +23°C) ¹ | 27.0 | kJ/m² | ISO 180/1A |
Table 5 of 5
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ³ | 80.0 | °C |
| Drying Time ³ | 4.0 | Hrs |
| Maximum Moisture Content ³ | 0.15 - 0.25 | % |
| Melt Temperature ³ | 265 - 275 | °C |
| Front - Zone 3 Temperature ³ | 275 - 290 | °C |
| Middle - Zone 2 Temperature ³ | 265 - 275 | °C |
| Rear - Zone 1 Temperature ³ | 250 - 260 | °C |
| Mold Temperature ³ | 80 - 95 | °C |
| Back Pressure ³ | 0.3 - 0.7 | MPa |
| Screw Speed ³ | 30 - 60 | rpm |
