LNP™ KONDUIT™ Compound OX11315
- Chemical Family
- Polyphenylene Sulfide (PPS)
SABIC's Specialties Business LNP KONDUIT OX11315 compound is based on Polyphenylene Sulfide (PPS) resin containing proprietary thermal filler. Added features of this grade include: Thermally Conductive, Electrically Insulative and Non-Brominated, Non-Chlorinated Flame Retardant. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Automotive Lighting
- Glazing & Window Elements
- Interior Fixtures
- Automotive Electronics
- Consumer Electronics
- Displays
- Industrial Automation
- Lighting
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- LNP™ KONDUIT™ Compound
- Polymer Name
- Polyphenylene Sulfide (PPS)
- Fillers Included
- Graphite, Mineral
- Graphite
- Mineral
- Flexural Modulus
- 21380.0 - 21380.0 MPa
- Additives Included
- Flame Retardant, Mold Release Agent
- Flame Retardant
- Mold Release Agent
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Flame Rating
- UL 94 5VA
- UL 94 V0
- Technology
- Plastics
- Labeling Claims
- Bromine-free
- Chlorine-free
- No Added PFAS
- Material Features
- Electrically Insulating
- Electrically Isolative
- Flame Retardant
- Good Mold Release
- No Added PFAS
- Non-brominated
- Non-chlorinated
- Thermally Conductive
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Appliances
- Automotive Electronics
- Building Materials
- Cell Phones
- Computer Components
- Construction Applications
- Displays
- Electrical/Electronic Applications
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Break, Type I, 5 mm/min) ¹¹ | 41 | MPa | ASTM D638 |
| Tensile Strain (Break, Type I, 5 mm/min) ¹¹ | 0.2 | % | ASTM D638 |
| Tensile Modulus (at 5 mm/min) ¹¹ | 30100 | MPa | ASTM D638 |
| Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹ | 82 | MPa | ASTM D790 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ | 26500 | MPa | ASTM D790 |
| Tensile Stress (Break, 5 mm/min) ¹¹ | 54 | MPa | ISO 527 |
| Tensile Strain (Break, 5 mm/min) ¹¹ | 0.3 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 18380 | MPa | ISO 527 |
| Flexural Stress ¹¹ | 84 | MPa | ISO 178 |
| Flexural Modulus (at 2 mm/min) ¹¹ | 21380 | MPa | ISO 178 |
Table 2 of 7
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity ¹¹ | 1.78 | — | ASTM D792 |
| Density ¹¹ | 1.76 | g/cm³ | ASTM D792 |
| Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹ | 0.01 | % | ASTM D570 |
| Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ | 0.34 | % | ASTM D955 |
| Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ | 0.44 | % | ASTM D955 |
| Moisture Absorption (at 23°C, 50% RH) ¹¹ | 0.01 | % | ISO 62 |
Table 3 of 7
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹ | 275 | °C | ASTM D648 |
| Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 242 | °C | ASTM D648 |
| Specific Heat ¹¹ | 1.26 | J/g-°C | ASTM C351 |
| Thermal Conductivity (through-plane, 10*10*3mm sample) ¹¹ | 3.5 | W/m-K | ASTM E1461-07 |
| Thermal Conductivity (in-plane, 25*0.4mm disc) ¹¹ | 15 | W/m-K | ASTM E1461-07 |
| Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 275 | °C | ISO 75/Bf |
| Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 238 | °C | ISO 75/Af |
| Relative Temperature Index (Electrical) ᵖ ¹¹ | 130 | °C | UL 746B |
| Relative Temperature Index (Mechanical with impact) ᵖ ¹¹ | 130 | °C | UL 746B |
| Relative Temperature Index (Mechanical without impact) ᵖ ¹¹ | 130 | °C | UL 746B |
Table 4 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Comparative Tracking Index ʳ ¹¹ | 400 | V | IEC 60112 |
| Surface Resistivity ¹¹ | 2.40E+15 | Ω | ASTM D257 |
| Dielectric Strength (at 1.6mm) ¹¹ | 1.2 | kV/mm | IEC 60243-1 |
Table 5 of 7
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Unnotched, at 23°C) ¹¹ | 54 | J/m | ASTM D4812 |
| Izod Impact (Notched, at 23°C) ¹¹ | 16 | J/m | ASTM D256 |
| Multi-Axial Impact ¹¹ | 1 | J | ISO 6603 |
| Instrumented Dart Impact Total Energy (at 23°C) ¹¹ | 5 | J | ASTM D3763 |
| Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | 3 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 1 | kJ/m² | ISO 180/1A |
Table 6 of 7
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁷ | 120 - 150 | °C |
| Drying Time ⁷ | 4 | Hrs |
| Melt Temperature ⁷ | 320 - 350 | °C |
| Front - Zone 3 Temperature ⁷ | 315 - 345 | °C |
| Middle - Zone 2 Temperature ⁷ | 315 - 345 | °C |
| Rear - Zone 1 Temperature ⁷ | 315 - 345 | °C |
| Mold Temperature ⁷ | 110 - 150 | °C |
| Back Pressure ⁷ | 0.3 - 0.7 | MPa |
| Screw Speed ⁷ | 60 - 100 | rpm |
| Shot to Cylinder Size ⁷ | 50 - 75 | % |
Table 7 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| UL Recognized (94-5VA Flame Class Rating) ᵖ | min. 2.5 | mm | UL 94 |
| UL Recognized (94V-0 Flame Class Rating) ᵖ | min. 1 | mm | UL 94 |
| UV-light (Water exposure/immersion) ᵖ | F1 | — | UL 746C |
