LNP™ KONDUIT™ Compound OX11314
- Chemical Family
- Polyphenylene Sulfide (PPS)
SABIC's Specialties Business LNP KONDUIT OX11314 compound is based on Polyphenylene Sulfide (PPS) resin containing mineral and glass fiber. Added features of this grade include: Thermally Conductive, Electrically Insulative and Non-Brominated, Non-Chlorinated Flame Retardant. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Automotive Lighting
- Glazing & Window Elements
- Interior Fixtures
- Automotive Electronics
- Consumer Electronics
- Displays
- Industrial Automation
- Lighting
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- LNP™ KONDUIT™ Compound
- Polymer Name
- Polyphenylene Sulfide (PPS)
- Fillers Included
- Glass Fiber, Mineral
- Glass Fiber
- Mineral
- Flexural Modulus
- 15500.0 - 15500.0 MPa
- Additives Included
- Flame Retardant
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Flame Rating
- UL 94 V0
- Technology
- Plastics
- Labeling Claims
- Bromine-free
- Chlorine-free
- No Added PFAS
- Material Features
- Electrically Insulating
- Electrically Isolative
- Flame Retardant
- No Added PFAS
- Non-brominated
- Non-chlorinated
- Thermally Conductive
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Appliances
- Automotive Electronics
- Building Materials
- Cell Phones
- Computer Components
- Construction Applications
- Displays
- Electrical/Electronic Applications
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Break, 5 mm/min) ¹¹ | 50 | MPa | ISO 527 |
| Tensile Stress (Break, Type I, 5 mm/min) ¹¹ | 44 | MPa | ASTM D638 |
| Tensile Strain (Break, 5 mm/min) ¹¹ | 0.5 | % | ISO 527 |
| Tensile Strain (Break, Type I, 5 mm/min) ¹¹ | 0.6 | % | ASTM D638 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 15000 | MPa | ISO 527 |
| Tensile Modulus (at 5 mm/min) ¹¹ | 12160 | MPa | ASTM D638 |
| Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹ | 47 | MPa | ASTM D790 |
| Flexural Stress (Yield, at 2 mm/min) ¹¹ | 75 | MPa | ISO 178 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ | 11200 | MPa | ASTM D790 |
| Flexural Modulus (at 2 mm/min) ¹¹ | 15500 | MPa | ISO 178 |
Table 2 of 7
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹¹ | 1.9 | g/cm³ | ASTM D792 |
| Density ¹¹ | 1.91 | g/cm³ | ISO 1183 |
| Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ | 0.18 | % | ASTM D955 |
| Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ | 0.39 | % | ISO 294 |
| Mold Shrinkage (on Tensile Bar, flow) ᵍ ¹¹ | 0.26 | % | SABIC method |
| Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ | 0.24 | % | ASTM D955 |
| Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ | 0.41 | % | ISO 294 |
| Water Absorption (at 23°C, 24hrs) ¹¹ | 0.1 | % | SABIC method |
| Moisture Absorption (at 23°C, 50% RH) ¹¹ | 0.03 | % | ISO 62 |
Table 3 of 7
23 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ | 0.00002 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ | 0.00003 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -30°C to 80°C, flow) ¹¹ | 0.000021 | 1/°C | ISO 11359-2 |
| Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹ | 191 | °C | ASTM D648 |
| Coefficient of Thermal Expansion (at -30°C to 80°C, xflow) ¹¹ | 0.000032 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at 40°C to 120°C, flow) ¹¹ | 0.000026 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹ | 0.000022 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at 40°C to 120°C, xflow) ¹¹ | 0.000051 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹¹ | 0.000035 | 1/°C | ISO 11359-2 |
| Specific Heat ¹¹ | 1.44 | J/g-°C | ASTM C351 |
| Thermal Conductivity (through-plane, 10*10*3mm sample) ¹¹ | 1 | W/m-K | ASTM E1461-07 |
| Thermal Conductivity (through-plane, 80*3mm disc) ¹¹ | 0.75 | W/m-K | ISO 22007-2 |
Table 4 of 7
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Surface Resistivity ¹¹ | min. 1.E+15 | Ω | ASTM D257 |
| Surface Resistivity ¹¹ | 1.00E+15 | Ω | ASTM D257 |
| Dielectric Strength (in oil, at 1mm) ¹¹ | min. 4 | kV/mm | ASTM D149 |
| Comparative Tracking Index ʳ ¹¹ | 600 | V | IEC 60112 |
| Comparative Tracking Index (UL, PLC) ¹¹ | 0 | PLC Code | UL 746A |
| Hot Wire Ignition (PLC 0) ¹¹ | min. 0.8 | mm | UL 746A |
| High Ampere Arc Ignition (PLC 0) ¹¹ | min. 1 | mm | UL 746A |
| High Ampere Arc Ignition (PLC 1) ¹¹ | min. 0.8 | mm | UL 746A |
Table 5 of 7
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Charpy Impact (Unnotched, at 23°C) ¹¹ | 5 | kJ/m² | ISO 179/2C |
| Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | 6 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 2 | kJ/m² | ISO 180/1A |
| Izod Impact (Unnotched, at 23°C) ¹¹ | 90 | J/m | ASTM D4812 |
| Izod Impact (Notched, at 23°C) ¹¹ | 25 | J/m | ASTM D256 |
| Charpy Impact (Notched, at 23°C) ¹¹ | 2 | kJ/m² | ISO 179/2C |
Table 6 of 7
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁷ | 120 - 150 | °C |
| Drying Time ⁷ | 4 | Hrs |
| Melt Temperature ⁷ | 320 - 350 | °C |
| Front - Zone 3 Temperature ⁷ | 315 - 345 | °C |
| Middle - Zone 2 Temperature ⁷ | 315 - 345 | °C |
| Rear - Zone 1 Temperature ⁷ | 315 - 345 | °C |
| Mold Temperature ⁷ | 110 - 150 | °C |
| Back Pressure ⁷ | 0.3 - 0.7 | MPa |
| Screw Speed ⁷ | 60 - 100 | rpm |
| Shot to Cylinder Size ⁷ | 50 - 75 | % |
Table 7 of 7
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| UL Recognized (94V-0 Flame Class Rating) ᵖ | min. 0.8 | mm | UL 94 |
| Glow Wire Ignitability Temperature (at 1.0 mm) ᵖ | 875 | °C | IEC 60695-2-13 |
| Glow Wire Ignitability Temperature (at 3.0 mm) ᵖ | 960 | °C | IEC 60695-2-13 |
| Glow Wire Flammability Index (at 3 mm) ᵖ | 960 | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at 1 mm) ᵖ | 960 | °C | IEC 60695-2-12 |
