LNP™ KONDUIT™ Compound OX10324

Chemical Family: Polyphenylene Sulfide (PPS)

SABIC's Specialties Business LNP KONDUIT OX10324 compound is based on Polyphenylene Sulfide (PPS) resin containing glass fiber and proprietary thermal filler. Added features of this grade include: Thermally Conductive and Non-Brominated, Non-Chlorinated Flame Retardant. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Product families

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Automotive Lighting

Building & Construction — Building Envelope & Roofing

Glazing & Window Elements

Building & Construction — Building Materials

Interior Fixtures

Electrical & Electronics — Devices & Assemblies

Automotive Electronics
Consumer Electronics
Displays
Industrial Automation
Lighting

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Other characteristics

Brand: LNP™ KONDUIT™ Compound
Polymer Name: Polyphenylene Sulfide (PPS)
Fillers Included: Glass Fiber, Graphite, Proprietary
Glass Fiber
Graphite
Proprietary
Flexural Modulus: 13500.0 - 13500.0 MPa
Additives Included: Flame Retardant, Impact Modifier, Mold Release Agent; Flame Retardant; Impact Modifier; Mold Release Agent
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Flame Rating: UL 94 V0
Technology: Plastics
Labeling Claims: Bromine-free
Chlorine-free
No Added PFAS
Material Features: Electrically Conductive
Flame Retardant
Good Mold Release
Impact Modified
No Added PFAS
Non-brominated
Non-chlorinated
Thermally Conductive
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Appliances
Automotive Electronics
Building Materials
Cell Phones
Computer Components
Construction Applications
Displays
Electrical/Electronic Applications
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 7

10 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	49	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	0.6	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	13500	MPa	ASTM D638
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	75	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	15600	MPa	ASTM D790
Tensile Stress (Break, 5 mm/min) ¹¹	53	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	0.6	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	14000	MPa	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	73	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	13500	MPa	ISO 178

Table 2 of 7

5 rows

Characteristic	Value	Unit	Method
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.1 - 0.2	%	ISO 294
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.1 - 0.3	%	ISO 294
Density ¹¹	1.75	g/cm³	ISO 1183
Water Absorption (at 23°C, 24hrs) ¹¹	0.01	%	ISO 62-1
Water Absorption (at 23°C, 24hrs) ¹¹	0.01	%	SABIC method

Table 3 of 7

17 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm) ¹¹	275	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹	258	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.0000132	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000025	1/°C	ASTM E831
Thermal Conductivity (through-plane, 60603mm plaque) ¹¹	1.30E+00	W/m-K	ISO 22007-2
Thermal Conductivity (in-plane, 60603mm plaque) ¹¹	18	W/m-K	ISO 22007-2
Thermal Conductivity (through-plane, 10103mm sample) ¹¹	3.5	W/m-K	ASTM E1461-07
Thermal Conductivity (in-plane, 25*0.4mm disc) ¹¹	15	W/m-K	ASTM E1461-07
Coefficient of Thermal Expansion (at -30°C to 80°C, flow) ¹¹	0.000013	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -30°C to 80°C, xflow) ¹¹	0.0000239	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹	0.0000138	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹¹	0.0000244	1/°C	ISO 11359-2

Table 4 of 7

3 rows

Characteristic	Value	Unit	Method
Surface Resistivity ¹¹	min. 2.5E+04	Ω	ASTM D257
Comparative Tracking Index (UL, PLC) ¹¹	4	PLC Code	UL 746A
Hot Wire Ignition (PLC 0) ¹¹	min. 1.2	mm	UL 746A

Table 5 of 7

4 rows

Characteristic	Value	Unit	Method
Izod Impact (Unnotched, at 23°C) ¹¹	70	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	24	J/m	ASTM D256
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	7	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80104, at 23°C) ¹¹	3	kJ/m²	ISO 180/1A

Table 6 of 7