LNP™ STAT-LOY™ Compound A3000TXB

Chemical Family: Acrylonitrile Butadiene Styrene (ABS)Styrenics

SABIC's Specialties Business LNP STAT-LOY A3000TXB compound is based on Acrylonitrile Butadiene Styrene (ABS) resin containing proprietary fillers. Added features of this grade include: Permanently Anti-Static, Transparent, Bio-assessed to ISO 10993. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Product families

Plastics — Basic Thermoplastics

Styrenics

Other characteristics

Brand: LNP™ STAT-LOY™ Compound
Polymer Name: Acrylonitrile Butadiene Styrene (ABS)
Fillers Included: Proprietary
Additives Included: Anti-Static Agent, UV Stabilizer
Anti-Static Agent
UV Stabilizer
Processing Methods: Injection Molding
Note: ᵈ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding. Do NOT mix NORYL GTX* resin with other grades of NORYL* resins. Polystyrene and acrylic regrind are effective purging Materials. Use temperature range appropriate for particular purging resin. Regrind must also be dried. Maximum 25% regrind. Dry at recommended temperatures and times for optimum performance. Overdrying can cause loss of physical properties and/or create appearance defects. Do not exceed recommended basic drying time and temperature above or:\n4-8 hrs at 95°C (200°F), 10 hrs max\n6-12 hrs at 80°C (175°F), 16 hrs max\n8-16 hrs at 65°C (150°F), 24 hrs max\nAVOID air circulating tray ovens. Moisture levels in heated ambient air can exceed moisture level in the resin itself, causing moisture ABSORPTION not drying. Avoid melt temperature in excess of 300°C (575°F) and residence times over 6-8 minutes (may affect properties and/or appearance). Nozzle temperature controls assist in elimination of drool premature freeze-off. Shot sizes in excess of 50% barrel capacity can lead to difficulties in providing a consistent, homogenous plastic melt.; ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Color: Translucent
Transparent
Markets: Building & Construction
Consumer Goods
Electrical & Electronics
Healthcare & Pharma
Printing & Packaging
Technology: Plastics
Labeling Claims: Biocompatible
Food Contact Acceptable
No Added PFAS
Product Features: Dimensional stability, transparency and biocomp assessed (ISO10993 certified)
Material Features: Anti-Static
Biocompatible
Excellent Transparency Properties
Food Contact Acceptable
Low Extractables
No Added PFAS
Translucent
UV Stabilized

Technical data

Table 1 of 6

14 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹	38	MPa	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	27	MPa	ASTM D638
Tensile Strain (Yield, Type I, 5 mm/min) ¹¹	4	%	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	31	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	1660	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	54	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	1630	MPa	ASTM D790
Tensile Stress (Yield, 5 mm/min) ¹¹	37	MPa	ISO 527
Tensile Stress (Break, 5 mm/min) ¹¹	26	MPa	ISO 527
Tensile Strain (Yield, 5 mm/min) ¹¹	4	%	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	29	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	1550	MPa	ISO 527

Table 2 of 6

6 rows

Characteristic	Value	Unit	Method
Specific Gravity ¹¹	1.09	—	ASTM D792
Density ¹¹	1.08	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.54	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.4 - 0.6	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.6 - 0.8	%	ASTM D955
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.81	%	ISO 62

Table 3 of 6

6 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	78	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	66	°C	ASTM D648
Coefficient of Thermal Expansion (at -30°C to 30°C, flow) ¹¹	0.00001	1/°C	ASTM D696
Coefficient of Thermal Expansion (at -30°C to 30°C, xflow) ¹¹	0.000109	1/°C	ASTM D696
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	77	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	66	°C	ISO 75/Af

Table 4 of 6

3 rows

Characteristic	Value	Unit	Method
Volume Resistivity ᵈ ¹¹	10000000000 - 1000000000000	Ω.cm	ASTM D257
Surface Resistivity ᵈ ¹¹	1000000000 - 100000000000	Ω	ASTM D257
Static Decay (at 5000V to max. 50V) ¹¹	max. 1	Seconds	FTMS101B

Table 5 of 6

4 rows

Characteristic	Value	Unit	Method
Izod Impact (Notched, at 23°C) ¹¹	131	J/m	ASTM D256
Multi-Axial Impact ¹¹	33	J	ISO 6603
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	20	J	ASTM D3763
Izod Impact (Notched, 80104, at 23°C) ¹¹	14	kJ/m²	ISO 180/1A

Table 6 of 6

10 rows

Characteristic	Value	Unit
Drying Temperature ⁷	70 - 80	°C
Drying Time ⁷	4	Hrs
Maximum Moisture Content ⁷	0.05 - 0.1	%
Melt Temperature ⁷	200 - 210	°C
Front - Zone 3 Temperature ⁷	205 - 215	°C
Middle - Zone 2 Temperature ⁷	195 - 205	°C
Rear - Zone 1 Temperature ⁷	180 - 195	°C
Mold Temperature ⁷	10 - 50	°C
Back Pressure ⁷	0.2 - 0.3	MPa
Screw Speed ⁷	30 - 60	rpm