LNP™ COLORCOMP™ Compound WX09915
SABIC's Specialties Business LNP COLORCOMP WX09915 compound is based on Polybutylene Terephthalate (PBT) resin. Added features of this grade include: Flame Retardant. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Housewares
- Consumer Goods — Sports & Recreation
- Interior
- Consumer Electronics
- Displays
- Non-Food Consumer Packaging
- Applicators & Accessories
Product Families
- Blends & Alloys
Other characteristics
- Brand
- LNP™ COLORCOMP™ Compound
- Density
- 1360.0 - 1360.0 kg/m³
- Polymer Name
- PC/PBT Alloy
- Flexural Modulus
- 2619.0 - 2619.0 MPa
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Color
- Custom
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Personal Care
- Printing & Packaging
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Additives Included
- Flame Retardant
- Material Features
- Excellent Aesthetics
- Flame Retardant
- Good Aesthetics
- Good Surface Appearance
- No Added PFAS
- Unreinforced
- Plastics and Elastomers End Uses
- Appliances
- Automotive Applications
- Automotive Interior Parts
- Cell Phones
- Commercial Appliance
- Computer Components
- Consumer Applications
- Containers
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus (at 5 mm/min) ¹¹ | 2694 | MPa | ASTM D638 |
| Tensile Stress (Yield, Type I, 5 mm/min) ¹¹ | 54 | MPa | ASTM D638 |
| Tensile Stress (Break, Type I, 5 mm/min) ¹¹ | 49 | MPa | ASTM D638 |
| Tensile Strain (Yield, Type I, 5 mm/min) ¹¹ | 7 | % | ASTM D638 |
| Tensile Strain (Break, Type I, 5 mm/min) ¹¹ | 16 | % | ASTM D638 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 2721 | MPa | ISO 527 |
| Tensile Stress (Yield, 5 mm/min) ¹¹ | 53 | MPa | ISO 527 |
| Tensile Stress (Break, 5 mm/min) ¹¹ | 48 | MPa | ISO 527 |
| Tensile Strain (Yield, 5 mm/min) ¹¹ | 6.9 | % | ISO 527 |
| Tensile Strain (Break, 5 mm/min) ¹¹ | 14.8 | % | ISO 527 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ | 2640 | MPa | ASTM D790 |
| Flexural Modulus (at 2 mm/min) ¹¹ | 2619 | MPa | ISO 178 |
Table 2 of 5
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹¹ | 1.36 | g/cm³ | ASTM D792 |
| Specific Gravity ¹¹ | 1.36 | — | ASTM D792 |
| Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ | 2.3 | % | ASTM D955 |
| Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ | 2.4 | % | ASTM D955 |
| Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹ | 0.58 | % | ASTM D570 |
| Moisture Absorption (at 23°C, 50% RH) ¹¹ | 0.05 | % | ISO 62 |
Table 3 of 5
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 65 | °C | ASTM D648 |
| Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹ | 155 | °C | ASTM D648 |
| Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 68 | °C | ISO 75/Af |
| Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 143 | °C | ISO 75/Bf |
| Coefficient of Thermal Expansion (at -30°C to 30°C, flow) ¹¹ | 0.00009 | 1/°C | ASTM D696 |
| Coefficient of Thermal Expansion (at -30°C to 30°C, xflow) ¹¹ | 0.00009 | 1/°C | ASTM D696 |
Table 4 of 5
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched, at 23°C) ¹¹ | 39 | J/m | ASTM D256 |
| Izod Impact (Unnotched, at 23°C) ¹¹ | 1450 | J/m | ASTM D4812 |
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 5.4 | kJ/m² | ISO 180/1A |
| Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | 86.7 | kJ/m² | ISO 180/1U |
| Multi-Axial Impact ¹¹ | 50.8 | J | ASTM D3763 |
| Multi-Axial Impact ¹¹ | 38.6 | J | ISO 6603 |
Table 5 of 5
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁷ | 121 | °C |
| Drying Time (Cumulative) ⁷ | 4 | Hrs |
| Melt Temperature ⁷ | 237 - 265 | °C |
| Front - Zone 3 Temperature ⁷ | 260 - 271 | °C |
| Middle - Zone 2 Temperature ⁷ | 243 - 254 | °C |
| Rear - Zone 1 Temperature ⁷ | 221 - 232 | °C |
| Mold Temperature ⁷ | 82 - 98 | °C |
| Back Pressure ⁷ | 0.17 - 0.34 | MPa |
| Screw Speed ⁷ | 30 - 60 | rpm |
| Maximum Moisture Content ⁷ | 0.05 | % |
