LNP™ COLORCOMP™ Compound MX05486

Chemical Family: PolyolefinsPolypropylenes (PP)

SABIC's Specialties Business LNP COLORCOMP MX05486 compound is based on Polypropylene (PP) resin. Added features of this grade include: Low Extractables. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Product families

Applications

Consumer Goods — Appliances & Electronics

Building & Construction — Building Materials

Pipes & Plumbing

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Printing & Packaging — Packaging

Food & Beverage Packaging
Industrial & Transport Packaging
Non-Food Consumer Packaging

Product Families

Plastics — Basic Thermoplastics

Polyolefins

Other characteristics

Brand: LNP™ COLORCOMP™ Compound
Polymer Name: Polypropylene (unspecified)
Melt Flow Index: 35.0 - 35.0 g/10 min
Processing Methods: Injection Molding
Note: ⁷ Параметры литья под давлением упоминаются только в качестве общих рекомендаций. Они могут не применяться или требовать корректировки в конкретных ситуациях, таких как малые объемы впрыска, литье крупногабаритных деталей, литье тонкостенных изделий и газовая инжекция.. ¹¹ Информация, указанная в технических паспортах, должна использоваться только в качестве ориентировочной для целей выбора материала и не должна использоваться в качестве спецификации или для проектирования деталей или пресс-форм.
Markets: Building & Construction
Consumer Goods
Electrical & Electronics
Printing & Packaging
Technology: Plastics
Labeling Claims: Food Contact Acceptable
No Added PFAS
Material Features: Food Contact Acceptable
Good Aesthetics
Good Surface Appearance
Low Extractables
Low Leachable
No Added PFAS
Unreinforced
Plastics and Elastomers End Uses: Appliances
Building Materials
Consumer Applications
Food Packaging
Home Appliances
Hoses
Pipes
Water Management
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 5

2 rows

Characteristic	Value	Unit	Method
Melt Flow Rate (at 230°C, 2.16 kgf) ¹¹	35	g/10 min	ASTM D1238
Specific Gravity ¹¹	0.9	—	ASTM D792

Table 2 of 5

3 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	31	MPa	ASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	12	%	ASTM D638
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	1170	MPa	ASTM D790

Table 3 of 5

1 row

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	88	°C	ASTM D648

Table 4 of 5