LNP™ COLORCOMP™ Compound G1000LX1

Chemical Family: Polysulfones

LNP COLORCOMP G1000LX1 compound is based on unfilled Polysulfone (PSU) resin. Added features of this grade include: Low Extractables.

Product families

Applications

Consumer Goods — Appliances & Electronics

Building & Construction — Building Materials

Pipes & Plumbing

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Healthcare & Pharma — Medical

Medical Devices & Assemblies

Printing & Packaging — Packaging

Food & Beverage Packaging
Industrial & Transport Packaging
Non-Food Consumer Packaging

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Other characteristics

Brand: LNP™ COLORCOMP™ Compound
Polymer Name: Polysulfone (PSU)
Flexural Modulus: 2500.0 - 2500.0 MPa
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Color: Custom
Markets: Building & Construction
Consumer Goods
Electrical & Electronics
Healthcare & Pharma
Industrial
Printing & Packaging
Technology: Plastics
Labeling Claims: Food Contact Acceptable
Material Features: Excellent Aesthetics
Food Contact Acceptable
Good Aesthetics
Good Surface Appearance
High Durability
High Temperature Resistance
Low Extractables
Low Leachable
Certifications and Compliance: FDA Compliant
Plastics and Elastomers End Uses: Appliances
Automotive Trim
Building Materials
Consumer Applications
Food Packaging
Food Preparation Equipment
Home Appliances
Hoses
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 5

6 rows

Characteristic	Value	Unit	Method
Density ¹¹	1.24	g/cm³	ISO 1183
Mold Shrinkage (flow) ᵍ ¹¹	0.7	%	SABIC method
Mold Shrinkage (xflow) ᵍ ¹¹	0.7	%	SABIC method
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.1	%	ISO 62-4
Moisture Absorption (at 23°C, 50% RH, Equilibrium) ¹¹	0.3	%	ISO 62-4
Melt Volume Rate (at 345°C, 2.16 kg) ¹¹	7.8	cm³/10 min	ISO 1133

Table 2 of 5

14 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, 50 mm/min) ¹¹	75	MPa	ISO 527
Tensile Stress (Break, 50 mm/min) ¹¹	60	MPa	ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹	65	%	ISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹	6	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	2550	MPa	ISO 527
Flexural Strength (at 2 mm/min) ¹¹	115	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	2500	MPa	ISO 178
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	70	MPa	ASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	5	%	ASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹	65	MPa	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	100	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	2600	MPa	ASTM D638

Table 3 of 5

8 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	180	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	170	°C	ISO 75/Af
Vicat Softening Temperature (Rate B/50) ¹¹	185	°C	ISO 306
Vicat Softening Temperature (Rate B/120) ¹¹	185	°C	ISO 306
Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹	0.000063	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹	0.000065	1/°C	ISO 11359-2
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	180	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	170	°C	ASTM D648

Table 4 of 5