LNP™ COLORCOMP™ Compound A1000PXB

Chemical Family: Acrylonitrile Butadiene Styrene (ABS)Styrenics

SABIC's Specialties Business LNP COLORCOMP A1000PXB compound is based on unfilled Acrylonitrile Butadiene Styrene (ABS) resin. Added features of this grade include: Healthcare, Biocompatible (ISO10993), Low Extractables, Gamma & EtO Sterilizable, Exceptional Processing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Product families

Applications

Consumer Goods — Appliances & Electronics

Building & Construction — Building Materials

Pipes & Plumbing

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Healthcare & Pharma — Medical

Medical Devices & Assemblies
Surgical Instruments & Trays
Tubing & Fluids Handling

Printing & Packaging — Packaging

Food & Beverage Packaging
Healthcare Packaging
Industrial & Transport Packaging
Non-Food Consumer Packaging

Product Families

Plastics — Basic Thermoplastics

Styrenics

Other characteristics

Brand: LNP™ COLORCOMP™ Compound
Polymer Name: Acrylonitrile Butadiene Styrene (ABS)
Melt Flow Index: 11.7 - 11.7 g/10 min, 12.0 - 12.0 g/10 min
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Color: Custom
Markets: Building & Construction
Consumer Goods
Electrical & Electronics
Healthcare & Pharma
Printing & Packaging
Flame Rating: UL 94 HB
Technology: Plastics
Labeling Claims: Biocompatible
Food Contact Acceptable
No Added PFAS
Material Features: Biocompatible
E-Beam Sterilizable
Ethylene Oxide Sterilizable
Excellent Aesthetics
Food Contact Acceptable
Gamma Sterilizable
Good Aesthetics
Good Processability
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Appliances
Consumer Applications
Fluid Handling
Food Packaging
Home Appliances
Hoses
Medical Devices
Medical Packaging
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 7

14 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹	46	MPa	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	35	MPa	ASTM D638
Tensile Strain (Yield, Type I, 5 mm/min) ¹¹	2	%	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	18	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	2480	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	79	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2620	MPa	ASTM D790
Tensile Stress (Yield, 5 mm/min) ¹¹	40	MPa	ISO 527
Tensile Stress (Break, 5 mm/min) ¹¹	35	MPa	ISO 527
Tensile Strain (Yield, 5 mm/min) ¹¹	2	%	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	35	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	2450	MPa	ISO 527

Table 2 of 7

7 rows

Characteristic	Value	Unit	Method
Specific Gravity ¹¹	1.04	—	ASTM D792
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	0.5 - 0.8	%	SABIC method
Melt Flow Rate (at 230°C, 3.8 kg) ¹¹	11.7	g/10 min	ASTM D1238
Density ¹¹	1.06	g/cm³	ISO 1183
Melt Flow Rate (at 220°C, 10.0 kg) ¹¹	42	g/10 min	ISO 1133
Melt Flow Rate (at 220°C, 5.0 kg) ¹¹	12	g/10 min	ISO 1133
Melt Viscosity (at 240°C, 1000 sec⁻¹) ¹¹	173	Pa-s	ISO 11443

Table 3 of 7

11 rows

Characteristic	Value	Unit	Method
Vicat Softening Temperature (Rate B/50) ¹¹	98	°C	ASTM D1525
Vicat Softening Temperature (Rate B/50) ¹¹	98	°C	ISO 306
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	93	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	77	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000088	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000085	1/°C	ISO 11359-2
Vicat Softening Temperature (Rate B/120) ¹¹	100	°C	ISO 306
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	80	°C	ISO 75/Af
Relative Temperature Index (Electrical) ᵖ ¹¹	60	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	60	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	60	°C	UL 746B

Table 4 of 7

6 rows

Characteristic	Value	Unit	Method
Comparative Tracking Index (UL, PLC) ¹¹	0	PLC Code	UL 746A
Hot Wire Ignition (PLC 3) ¹¹	min. 3	mm	UL 746A
Hot Wire Ignition (PLC 4) ¹¹	min. 1.5	mm	UL 746A
High Ampere Arc Ignition (PLC 3) ¹¹	min. 1.5	mm	UL 746A
High Voltage Arc Track Rate (PLC) ¹¹	2	PLC Code	UL 746A
Arc Resistance (Tungsten, PLC) ¹¹	6	PLC Code	ASTM D495

Table 5 of 7