LNP™ KONDUIT™ Compound PX13322

Chemical Family: Polyamides

SABIC's Specialties Business LNP KONDUIT PX13322 compound is based on Nylon 6 resin containing mineral and glass fiber. Added features of this grade include: Thermally Conductive, Electrically Insulative and Non-Brominated, Non-Chlorinated Flame Retardant. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Product families

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Automotive Lighting

Building & Construction — Building Envelope & Roofing

Glazing & Window Elements

Building & Construction — Building Materials

Interior Fixtures

Electrical & Electronics — Devices & Assemblies

Automotive Electronics
Consumer Electronics
Displays
Industrial Automation
Lighting

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Other characteristics

Brand: LNP™ KONDUIT™ Compound
Polymer Name: Polyamide 6 (PA 6)
Fillers Included: Glass Fiber, Mineral
Glass Fiber
Mineral
Flexural Modulus: 12000.0 - 12000.0 MPa
Additives Included: Flame Retardant, Heat Stabilizer, Mold Release Agent, UV Stabilizer; Flame Retardant; Heat Stabilizer; Mold Release Agent; UV Stabilizer
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Flame Rating: UL 94 V0
Technology: Plastics
Labeling Claims: Bromine-free
Chlorine-free
No Added PFAS
Material Features: Electrically Insulating
Electrically Isolative
Flame Retardant
Good Mold Release
Heat Stabilized
No Added PFAS
Non-brominated
Non-chlorinated
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Appliances
Automotive Electronics
Building Materials
Cell Phones
Computer Components
Construction Applications
Displays
Electrical/Electronic Applications
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 7

10 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	77	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	0.7	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	13700	MPa	ASTM D638
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	127	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	11000	MPa	ASTM D790
Tensile Stress (Break, 5 mm/min) ¹¹	78	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	0.8	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	13000	MPa	ISO 527
Flexural Stress (Break, 2 mm/min) ¹¹	128	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	12000	MPa	ISO 178

Table 2 of 7

4 rows

Characteristic	Value	Unit	Method
Density ¹¹	1.69	g/cm³	ASTM D792
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.54	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.57	%	ASTM D955
Water Absorption (at 23°C, 24hrs) ¹¹	0.06	%	ISO 62-1

Table 3 of 7

15 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm) ¹¹	205	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹	174	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.0000308	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.0000477	1/°C	ASTM E831
Coefficient of Thermal Expansion (at 40°C to 120°C, flow) ¹¹	0.0000235	1/°C	ASTM E831
Coefficient of Thermal Expansion (at 40°C to 120°C, xflow) ¹¹	0.0000525	1/°C	ASTM E831
Thermal Conductivity (through-plane, 60603mm plaque) ¹¹	1	W/m-K	ISO 22007-2
Thermal Conductivity (in-plane, 60603mm plaque) ¹¹	3.3	W/m-K	ISO 22007-2
Thermal Conductivity (through-plane, 10103mm sample) ¹¹	2	W/m-K	ASTM E1461-07
Thermal Conductivity (in-plane, 25*0.4mm disc) ¹¹	3.4	W/m-K	ASTM E1461-07
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	204	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	162	°C	ISO 75/Af

Table 4 of 7

8 rows

Characteristic	Value	Unit	Method
Surface Resistivity ¹¹	min. 1.E+15	Ω	ASTM D257
Dielectric Strength (in oil, at 1mm) ¹¹	min. 10	kV/mm	ASTM D149
Dielectric Constant (at 1.1 GHz) ¹¹	4.86	—	ASTM ES 7-83
Dissipation Factor (at 1.1 GHz) ¹¹	0.0103	—	ASTM ES 7-83
Comparative Tracking Index ʳ ¹¹	600	V	IEC 60112
Hot Wire Ignition (PLC 0) ¹¹	min. 1	mm	UL 746A
Hot Wire Ignition (PLC 1) ¹¹	min. 0.8	mm	UL 746A
High Ampere Arc Ignition (PLC 0) ¹¹	min. 0.8	mm	UL 746A

Table 5 of 7