To catalogue
ELASTOSIL® R Plus 4050/55 MH 9005
- Chemical Family
- Silicones
ELASTOSIL® R Plus 4050/55 MH 9005 is an addition-cure, one-component high consistency silicone rubber specifically designed for the manufacture of molded articles. The vulcanizates of this silicone rubber exhibit excellent heat stability. ELASTOSIL® R Plus 4050/55 MH 9005 is suitable for various household applications.
Product families
Elastomers — Specialty Elastomers
- Silicone Elastomers
Other characteristics
- Brand
- ELASTOSIL® R
- End Uses
- Household Goods
- Features
Food Contact Acceptable, Good Thermal Stability, Heat Resistance, High Consistency, High Resilience, Low Compression Set
- Polymer Name
- Silicone Elastomer
- Tear Strength
- 23.0 - 23.0 kN/m
- Note
Cure conditions: 15 min / 165 °C in press, post-cured 4 h / 200 °C for cured properties.
- Markets
- Consumer Goods
- Cure
- Chemical Cure
- Applications
- Consumer Goods — Housewares
- Technology
- Elastomers
- Labeling Claims
- Food Contact Acceptable
- Special Features
- Addition Curing
- Food-contact
- Heat resistant
- High rebound resilience
- One-component
- Ultra-low compression set
- Material Features
- Food Contact Acceptable
- Good Thermal Stability
- Heat Resistance
- High Consistency
- High Resilience
- Low Compression Set
- Storage Information
Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination.
- Chemical Inventories
- AIIC (Australia)
- PICCS (Phillipines)
- TCSI (Taiwan)
- TSCA (USA)
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compression Set (at 22 hours, 175°C) | 6 | % | DIN ISO 815-1 type B method A |
| Density | 1.13 | g/cm³ | DIN EN ISO 1183-1 A |
| Elongation (at break) | 400 | % | ISO 37 Type 1 |
| Rebound Resilience | 59 | % | ISO 4662 |
| Shore Hardness A | 58 | — | DIN ISO 48-4 |
| Tear Strength | 23 | N/mm | ASTM D 624 B |
| Tensile Strength | 8.4 | N/mm² | ISO 37 Type 1 |
