To catalogue
ELASTOSIL® R 573/50 A/B
- Chemical Family
- Silicones
ELASTOSIL® R 573/50 A/B is a two-component, electrically conductive HCR silicone rubber for the manufacture of electrically conductive products. This product is an addition-cured electrically conductive HCR silicone rubber that shows a low volume resistivity. This product can be used within a temperature range of -55 °C to +210 °C.
Product families
Applications
Electrical & Electronics — Wire & Cable
- Power Transmission & Distribution
Product Families
Elastomers — Specialty Elastomers
- Silicone Elastomers
Other characteristics
- Brand
- ELASTOSIL® R
- End Uses
- Battery Cable
- Features
Electrically Conductive, High Consistency, Low Volume Resistivity
- Polymer Name
- Silicone Elastomer
- Tear Strength
- 13.0 - 13.0 kN/m
- Note
Cure conditions: 15 min / 165 °C in press, post-cured 30 min / 200 °C.
- Markets
- Electrical & Electronics
- Properties
This product is an addition cured electrically conductive HCR silicone rubber which shows a low volume resistivity.
- Cure
- Chemical Cure
- Technology
- Elastomers
- Special Features
- Addition Curing
- Electrically conductive
- Two-component
- Material Features
- Electrically Conductive
- High Consistency
- Storage Information
Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination.
- Chemical Inventories
- AICS (Australia)
- DSL (Canada)
- ENCS (Japan)
- IECSC (China)
- PICCS (Phillipines)
- TCSI (Taiwan)
- TSCA (USA)
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compression Set (at 22 hours, 175°C) | 30 | % | DIN ISO 815-1 type B method A |
| Density | 1.11 | g/cm³ | DIN EN ISO 1183-1 A |
| Elongation (at break) | 340 | % | ISO 37 Type 1 |
| Rebound Resilience | 58 | % | ISO 4662 |
| Shore Hardness A | 50 | — | DIN ISO 48-4 |
| Tear Strength | 13 | N/mm | ASTM D 624 B |
| Tensile Strength | 5.5 | N/mm² | ISO 37 Type 1 |
| Volume Resistivity | 7 | Ohm-cm | IEC 62631-3-1 |
