ELASTOSIL® R 3113 A/B

Chemical Family: Silicones

ELASTOSIL® R 3113 A/B is a two-component, heat-curing silicone rubber adhesive. It is used for fast bonding of cured silicone rubber to cured silicone rubber. It is suitable for bonding large, flat shapes. Adhesion can be further improved by post-curing, e.g. at 200°C for 4 h.

Product families

Ready-to-Use Products — Adhesives & Sealants

Other Adhesives & Sealants

Other characteristics

Brand: ELASTOSIL® R
Cure Method: Heat Cure
Product Type: 2K (2 component) Sealant
Application Area: Insulators
Compatible Substrates & Surfaces: Elastomers & Rubbers
Note: Cure conditions: 10 min / 165°C.
Processing: Before applying the adhesive the surfaces of the substrate should be cleaned with a non-polar solvent, e.g. chemically pure acetone or white spirit.; After thorough mixing of component A with 1% of component B the mixture should be applied in a thin layer.; The parts should be fixed with low pressure to avoid squeezing out the adhesive. Curing of the adhesive takes place at 130°C.; The curing process of the adhesive is finished after approx. 30 seconds at 130°C.; Cycle time is mainly depending on the heat transfer and volume of the substrate.; Adhesion can be further improved by post curing, e.g. at 200°C for 4h.
Cure: Heat Cure
Applications: Insulators
Technology: Ready-to-Use Products
Specific Features: Heat curing Silicone rubber adhesive.

Technical data

Table 1 of 2

5 rows

Characteristic	Value	Unit	Method
Density	1.15	g/cm³	DIN EN ISO 1183-1 A
Elongation (at break)	350	%	ISO 37 Type 1
Shore Hardness A	67	—	DIN ISO 48-4
Tear Strength	22	N/mm	ASTM D 624 B
Tensile Strength	9	N/mm²	ISO 37 Type 1

Table 2 of 2