Indestructible Paint PL181 High Temperature Dry Film Lubricant
PL181 High Temperature Dry Film Lubricant is a dry film lubricant resistant to corrosive environments, skydrol, lubricants, fuels and operating temperatures of up to 1,300°F, in areas of fretting and anti-galling.
Product families
Applications
- Aerospace Fluids & Lubricants
Product Families
- Lubricants & Oils
Other characteristics
- Features
Automotive Fluid Resistant, Corrosion Resistant, Friction Reduction, Galling Resistant, High Temperature Performance, Wide Temperature Operating Range
- Product Type
- Dry Lubricants
- Application Area
- Turbines
- Usage
Used for example on the marine RB211 and Rolls Westinghouse WR21.. Protecting an internal satellite bush running at 930 - 1020°F, it is used at the turbine end in a variable geometry area to reduce friction.
- Gloss
- Semi-Gloss
- Markets
- Automotive & Transportation
- Storage
Highly flammable liquid - Store and use in accordance with the flammable liquid regulations.; Shelf Life - 12 months temperate; 6 months tropical
- Pack Size
- 500ml or to customer requirements.
- Components
- Single Pack Product.
- May be thinned with demineralised water.
- Application
The object should be abrasive blasted, dry and grease-free.; Stir well or roll before use. Do not shake. The product is supplied and ready for use. Can be thinned with maximum 10% de-mineralized water.; Apply to the substrate (steel to MSRR 6504) by spray; heating the part to 50°C improves the quality of the coating. Full obliteration will not be achieved; the product is semi-translucent. It is normal to build up the coating thickness in 3 - 4 coats.; It is possible to add up to 10% de-mineralized water to ease the viscosity and then spray very soft and apply thin mist coats, allowing a flash off between the coats. Wash equipment with water; Air dry for a minimum of 30 minutes, stove for 1 hour at 300°F.
- Performance
Tested for resistance to MSRR 9200 which includes:; Dry oxidizing heat at 1,290°F; Skydrol at 155°F; Rubbing wear test 100,000 rubs in 1 hour under 1/25 lbs pressure at 400, 500, 600 and 700°C; 1000 hours at 1,110°F
- Technology
- Ready-to-Use Products
- Cleanup Solvents
- Water
- HIGHLIGHTS
PL181 should be tested before use in aqueous envionments or manufacture processes where aqueous washing is used.. PL181 has only limited resistance to water immersion.
- Approvals/Specifications
- MSRR 9200
- OMat 4/36
- RR Code 132499
- Complies with Def Stan 91-19.
- Ready to Use Product Features
- Automotive Fluid Resistant
- Corrosion Resistant
- Friction Reduction
- Galling Resistant
- High Temperature Performance
- Wide Temperature Operating Range
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Supply Viscosity | Ready for Use | — |
| Specific Graviy | 1.26 - 1.29 | kg/l |
| Theoretical Coverage (15 Micron) | 11.5 | m²/l |
