Ply-Guard PSC8
- Chemical Family
- Silicones
Ply-Guard PSC8 is a newly engineered two-component Polysiloxane coating technology offering the combination of technologically advanced siloxane resins and special ultraviolet inhibitors resulting in an industrial finish coat providing exceptional long term durability. Ply-Guard PSC8 provides extremely long-term performance and a wide range of uses such as exterior coatings for bridges, marine vessels, offshore structures, railcars, tanks, pulp and paper mills, chemical plants, refineries, and other steel structures exposed to the most corrosive environments.
Product families
Applications
- Marine Coatings
- Rail & Mass Transit Coatings
- Industrial Maintenance
- Pavement Highways Roads & Bridges
- Pulping & Processing
- Marine
- Rail & Mass Transit
Product Families
- Protective Coatings
Other characteristics
- Brand
- Ply-Guard
- Features
Corrosion Resistant, Good Abrasion Resistance, Good Color Stability, Good Gloss Retention, Good Weather Fastness, High Durability, Low VOC
- Product Type
- 2K (2 component) Coating
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Metal, Steel
- Markets
- Automotive & Transportation
- Building & Construction
- Industrial
- Paints & Coatings
- Storage
- Store between 60—95°F (16-35°C)
- Shelf LIfe
- 1 year in original unopened containers
- Key Features
Meets or exceeds SSPC Paint 36, Level 3 requirements Can be used as a clear finish over other coating technologies to enhance color and gloss longevity Offers excellent abrasion resistance Is easily cleaned Contains low VOCs or Hazardous Air Pollutants (HAPs)
- Technology
- Ready-to-Use Products
- Labeling Claims
- HAPs-free
- Technical Details
- Standard Colors Available; High Gloss
- 4.0 Part A (base):1.0 Part B (catalyst)
- 6 Hours to Handle; Dry Hard in 10 Hours
- Application Methods
- Brush
- Roller
- Spray
- HIGHLIGHTS
Ply-Guard PSC8 outperforms both acrylic and polyester urethane coatings when tested in weathering and salt fog cabinets. The color and gloss retention is dramatic with an expected performance life which may exceed 30 years. The use of proper prime coats must be carefully considered due to the long expected life of the finish.
- Surface Preparation
When applied over an approved primer the surface to be coated shall be absolutely clean (free of contamination). Apply only over properly prepared and primed surfaces. Care must be taken in selection of the primers and surface preparation. Consult with your Polyset Technical Representative for advice regarding approved primers.; Mixing Mix contents of Part A (base component) separately prior to addition of Part B (catalyst). Mix total contents of Part B (catalyst) container into Part A (base) container using slow agitation so as to avoid incorporation of moisture. If Part B (catalyst) container is bulged or the contents are not clear, do not use. Mix only the number of kits that can be applied within a 4 hour period. Never mix components from one manufacturer with those of another.; Application Can be applied by conventional and airless spray, brush, or roller. Do not apply when the surface temperature is less than 5°F (2.8°C) above the dew point.
- Ready to Use Product Features
- Corrosion Resistant
- Good Abrasion Resistance
- Good Color Stability
- Good Gloss Retention
- Good Weather Fastness
- High Durability
- Low VOC
- Compatible Substrates and Surfaces
- Metal
- Steel
