Ply-Guard AS (Ultra Flex)
Ply-Guard AS (Ultra Flex) is a new-generation, high-gloss, fast curing, two-component aliphatic polyaspartic polyurea topcoat that provides superior flexibility in addition to superior color and gloss retention.
Product families
Applications
- Automotive OEM Coatings
- Marine Coatings
- Industrial Coatings
- Industrial Maintenance
- Pavement Highways Roads & Bridges
- Marine
Product Families
- Protective Coatings
Other characteristics
- Brand
- Ply-Guard
- Features
Corrosion Resistant, Excellent Dirt Pick-up Resistance, Excellent Flexibility, Fast Curing, Good Abrasion Resistance, Good Color Stability, Good Gloss Retention, High Gloss, High Impact Resistance, Low Temperature Curing, UV Resistant
- Product Type
- 2K (2 component) Coating, Top Coat
- 2K (2 component) Coating
- Top Coat
- Compatible Substrates & Surfaces
- Metal, Steel
- Usage
Intended for use as a topcoat over steel that has been properly primed with Polyset's WB HRZS® Primer Ideal for applications requiring fast re-coat and turn around time for the following, demanding application areas:; Steel Structures; Tanks; Industrial Maintenance Equipment; Bridges; Marine Applications, Off-Shore Rigs, and Platforms; Fabrication Shops; Transportation Vehicles and Equipment; OEM Product Finishing
- Markets
- Automotive & Transportation
- Building & Construction
- Paints & Coatings
- Storage
Store between 40-95°F (4—35°C) Store in a dry, covered area away from direct sunlight.
- Benefits
Excellent color and gloss retention, low dirt pick-up and ease of graffiti removal; Superior flexibility for demanding applications; High resistance to salt corrosion & chemical attack, abrasion, and impact; Available in multiple colors and finishes
- Shelf LIfe
- 1 year in the original, unopened containers
- Key Features
Fast cure & re-coat — Dry-to-handle in 40 minutes @ 77°F 25°C) and 50% relative humidity; Low-Temperature cure possible — Minimum cure temperature as low as -20°F (-29°C); UV-resistant; optical clarity of cleaner sealer/finish; Insensitive to high humidity — Relative Humidity to 98% possible during application; No dew point temperature differentials; Excellent Direct-To-Metal (DTM) coating — Passing 2,000 hours testing in a salt-fog corrosion chamber; Exceptional corrosion performance as a topcoat over an Inorganic Zinc base coat — Passing 13,000 hours in a salt-fog corrosion chamber
- Technology
- Ready-to-Use Products
- Technical Details
Increased film thickness will take longer. Do not exceed 48 hours between coats.
- HIGHLIGHTS
In addition, Ply-Guard AS (Ultra Flex) meets or exceeds SSPC Paint Specifications 36, 38, & 39 Level 3 weathering performance requirements. Ply-Guard AS (Ultra Flex) can achieve a 5 to 15 mils DFT coating that is free of bubbles or pinholes as part of an effective two-coat system over the recommended WB HRZS® Primer (3-4 mils DFT). Ply-Guard AS (Ultra Flex) is ideal for applications requiring fast re-coat & turn-around times at low temperatures on complex steel structures.
- Surface Preparation
Surface must be clean, cool, dry, and free of grease, scaling paint, special surface hardeners, curing agent or other contaminants.
- Ready to Use Product Features
- Corrosion Resistant
- Excellent Dirt Pick-up Resistance
- Excellent Flexibility
- Fast Curing
- Good Abrasion Resistance
- Good Color Stability
- Good Gloss Retention
- High Gloss
- Compatible Substrates and Surfaces
- Metal
- Steel
