LNP™ THERMOCOMP™ Compound EF004XXP

Chemical Family: Polyetherimide (PEI)Polyimides (PI)

SABIC's Specialties Business LNP THERMOCOMP EF004XXP compound is based on Polyetherimide (PEI) resin containing 20% glass fiber. Added features of this grade include: High Modulus, High Strength, Good Dimension Stability and Good Warpage Control. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Lawn & Garden
Consumer Goods — Sports & Recreation

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Consumer Electronics
Displays

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors
Housings & Enclosures
Switches & Relays

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Other characteristics

Brand: LNP™ THERMOCOMP™ Compound
Polymer Name: Polyether Imide (PEI)
Fillers Included: Glass Fiber
Processing Methods: Injection Molding
Note: ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Building & Construction
Consumer Goods
Electrical & Electronics
Personal Care
Printing & Packaging
Flame Rating: UL 94 V0
UL 94 V2
Technology: Plastics
Labeling Claims: No Added PFAS
Material Features: Cost Effective
Dimensional Stability
High Modulus
High Stiffness
High Temperature Resistance
Low Warpage
No Added PFAS
Very Good Heat Resistance
Country Availability: Canada
China (Mainland)
Mexico
USA
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Appliances
Building Materials
Cell Phones
Commercial Appliance
Computer Components
Consumer Applications
Containers
Displays
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

5 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹	150	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	3.5	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	7040	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	240	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	7030	MPa	ASTM D790

Table 2 of 6

2 rows

Characteristic	Value	Unit	Method
Density ¹¹	1.42	g/cm³	ASTM D792
Melt Flow Rate (at 337°C, 6.7 kgf) ¹¹	9.5	g/10 min	ASTM D1238

Table 3 of 6

4 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	210	°C	ASTM D648
Relative Temperature Index (Electrical) ᵖ ¹¹	105	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	105	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	105	°C	UL 746B

Table 4 of 6

1 row

Characteristic	Value	Unit	Method
Izod Impact (Notched, at 23°C) ¹¹	60	J/m	ASTM D256

Table 5 of 6

11 rows

Characteristic	Value	Unit
Drying Temperature ⁷	150	°C
Drying Time ⁷	4 - 6	Hrs
Melt Temperature ⁷	360 - 400	°C
Rear - Zone 1 Temperature ⁷	360 - 380	°C
Middle - Zone 2 Temperature ⁷	370 - 390	°C
Front - Zone 3 Temperature ⁷	380 - 400	°C
Nozzle Temperature ⁷	390 - 400	°C
Mold Temperature ⁷	140 - 180	°C
Back Pressure ⁷	0.3 - 0.7	MPa
Screw Speed (Circumferential speed) ⁷	0.2 - 0.3	m/s
Vent Depth ⁷	0.025 - 0.076	mm

Table 6 of 6