LNP™ THERMOCOMP™ Compound DF002FVQ
- Chemical Family
- Polycarbonate (PC)
SABIC's Specialties Business LNP™ THERMOCOMP™ DF002FVQ compound is based on Polycarbonate (PC) resin containing 10% glass fiber and available in black color only. Added features of this grade include: Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Good Adhesion Strength, UL94 V0@0.8mm (black).
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Interior
- Consumer Electronics
- Displays
- Non-Food Consumer Packaging
- Applicators & Accessories
- Connectors
- Housings & Enclosures
- Switches & Relays
Product Families
- Polycarbonates
Other characteristics
- Brand
- LNP™ THERMOCOMP™ Compound
- Polymer Name
- Polycarbonate (PC)
- Fillers Included
- Glass Fiber
- Flexural Modulus
- 4100.0 - 4100.0 MPa
- Additives Included
Flame Retardant, Heat Stabilizer, Mold Release Agent; Flame Retardant; Heat Stabilizer; Mold Release Agent
- Processing Methods
- Injection Molding, Laser Sintering (SLS)
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Personal Care
- Printing & Packaging
- Flame Rating
- UL 94 V0
- Technology
- Plastics
- Material Features
- Cost Effective
- Enhanced Electroplatability
- Excellent Dielectric Properties
- Flame Retardant
- Good Adhesion
- Good Mold Release
- Heat Stabilized
- High Stiffness
- Country Availability
- Canada
- China (Mainland)
- Mexico
- USA
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Interior Parts
- Cell Phones
- Computer Components
- Consumer Applications
- Containers
- Displays
- Electrical Components
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
- Laser Sintering (SLS)
Technical data
Table 1 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹¹ | 1.35 | g/cm³ | ASTM D792 |
| Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹ | 11 | g/10 min | ASTM D1238 |
| Mold Shrinkage (flow) ᵍ ¹¹ | 0.2 - 0.4 | % | SABIC method |
| Mold Shrinkage (xflow) ᵍ ¹¹ | 0.3 - 0.5 | % | SABIC method |
Table 2 of 7
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Break, Type I, 5 mm/min) ¹¹ | 60 | MPa | ASTM D638 |
| Tensile Strain (Break, Type I, 5 mm/min) ¹¹ | 3 | % | ASTM D638 |
| Tensile Modulus (at 5 mm/min) ¹¹ | 4610 | MPa | ASTM D638 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ | 4300 | MPa | ASTM D790 |
| Flexural Strength (at 1.3 mm/min, 50 mm span) ¹¹ | 115 | MPa | ASTM D790 |
| Tensile Stress (Break, 5 mm/min) ¹¹ | 60 | MPa | ISO 527 |
| Tensile Strain (Break, 5 mm/min) ¹¹ | 3.5 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 4625 | MPa | ISO 527 |
| Flexural Modulus (at 2 mm/min) ¹¹ | 4100 | MPa | ISO 178 |
| Flexural Strength (at 2 mm/min) ¹¹ | 110 | MPa | ISO 178 |
Table 3 of 7
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹ | 126 | °C | ASTM D648 |
| Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 120 | °C | ASTM D648 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ | 0.000035 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ | 0.000035 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ | 0.000067 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ | 0.000065 | 1/°C | ASTM E831 |
| Relative Temperature Index (Electrical) ᵖ ¹¹ | 80 | °C | UL 746B |
| Relative Temperature Index (Mechanical with impact) ᵖ ¹¹ | 80 | °C | UL 746B |
| Relative Temperature Index (Mechanical without impact) ᵖ ¹¹ | 80 | °C | UL 746B |
Table 4 of 7
10 rows| Characteristic | Value | Method |
|---|---|---|
| Dielectric Constant (at 1.1 GHz) ¹¹ | 3.15 | SABIC method |
| Dissipation Factor (at 1.1 GHz) ¹¹ | 0.01 | SABIC method |
| Dielectric Constant (at 1.9 GHz) ¹¹ | 3.17 | SABIC method |
| Dissipation Factor (at 1.9 GHz) ¹¹ | 0.01 | SABIC method |
| Dielectric Constant (at 5 GHz) ¹¹ | 3.15 | SABIC method |
| Dissipation Factor (at 5 GHz) ¹¹ | 0.01 | SABIC method |
| Dielectric Constant (at 10 GHz) ¹¹ | 3.17 | SABIC method |
| Dissipation Factor (at 10 GHz) ¹¹ | 0.01 | SABIC method |
| Dielectric Constant (at 20 GHz) ¹¹ | 3.04 | SABIC method |
| Dissipation Factor (at 20 GHz) ¹¹ | 0.01 | SABIC method |
Table 5 of 7
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched, at 23°C) ¹¹ | 100 | J/m | ASTM D256 |
| Izod Impact (Unnotched, at 23°C) ¹¹ | 600 | J/m | ASTM D4812 |
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 9 | kJ/m² | ISO 180/1A |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ | 10 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹ | 42 | kJ/m² | ISO 179/1eU |
Table 6 of 7
11 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁷ | 110 | °C |
| Drying Time ⁷ | 3 - 4 | Hrs |
| Maximum Moisture Content ⁷ | 0.02 | % |
| Melt Temperature ⁷ | 290 - 310 | °C |
| Nozzle Temperature ⁷ | 285 - 310 | °C |
| Front - Zone 3 Temperature ⁷ | 285 - 310 | °C |
| Middle - Zone 2 Temperature ⁷ | 285 - 310 | °C |
| Rear - Zone 1 Temperature ⁷ | 285 - 310 | °C |
| Mold Temperature ⁷ | 100 - 130 | °C |
| Back Pressure ⁷ | 0.1 - 0.3 | MPa |
| Screw Speed ⁷ | 50 - 150 | rpm |
Table 7 of 7
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| UL Recognized (94V-0 Flame Class Rating) ᵖ | 0.8 | mm | UL 94 |
