LNP™ THERMOCOMP™ Compound PF00DS-BK1G298

Chemical Family: Polyamides

LNP THERMOCOMP PF00DS compound is based on PA6 resin containing glass fiber. Added features of this grade include: Heat Stabilized, Custom color Black.

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Lawn & Garden
Consumer Goods — Sports & Recreation

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Consumer Electronics
Displays

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors
Housings & Enclosures
Switches & Relays

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Other characteristics

Brand: LNP™ THERMOCOMP™ Compound
Polymer Name: Polyamide 6 (PA 6)
Fillers Included: Glass Fiber
Flexural Modulus: 19000.0 - 19000.0 MPa
Additives Included: Heat Stabilizer
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Color: Custom
Markets: Building & Construction
Consumer Goods
Electrical & Electronics
Personal Care
Printing & Packaging
Flame Rating: UL 94 HB
Technology: Plastics
Material Features: Cost Effective
Heat Stabilized
High Stiffness
Country Availability: Canada
China (Mainland)
Mexico
USA
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Appliances
Building Materials
Cell Phones
Commercial Appliance
Computer Components
Consumer Applications
Containers
Displays
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 7

4 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break, 5 mm/min) ¹¹	235	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	1.8	%	ISO 527
Flexural Stress (Break, 2 mm/min) ¹¹	335	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	19000	MPa	ISO 178

Table 2 of 7

2 rows

Characteristic	Value	Unit	Method
Mold Shrinkage (flow) ᵍ ¹¹	0.1 - 0.2	%	SABIC method
Density ¹¹	1.7	g/cm³	ISO 1183

Table 3 of 7

3 rows

Characteristic	Value	Unit	Method
Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹	0.00001	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹	0.00006	1/°C	ISO 11359-2
Heat Deflection Temperature/Ae (at 1.8 Mpa, Edgew 120104, sp=100mm) ¹¹	220	°C	ISO 75/Ae

Table 4 of 7

1 row

Characteristic	Value	Unit	Method
Surface Resistivity ¹¹	1.00E+14	Ω	ASTM D257

Table 5 of 7