LNP™ THERMOCOMP™ Compound RF0039S

Chemical Family: Polyamides

LNP THERMOCOMP RF0039S compound is based on Nylon 6/6 resin containing 15% glass fiber. Added features of this grade include: Flame Retardant, Heat Stabilized.

Product families

Plastics — Engineering & Specialty Polymers

Polyamides

Other characteristics

Brand: LNP™ THERMOCOMP™ Compound
Polymer Name: Polyamide 66 (PA 66)
Fillers Included: Glass Fiber
Flexural Modulus: 5170.0 - 5170.0 MPa
Additives Included: Flame Retardant, Heat Stabilizer, Mold Release Agent; Flame Retardant; Heat Stabilizer; Mold Release Agent
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Building & Construction
Consumer Goods
Electrical & Electronics
Personal Care
Printing & Packaging
Flame Rating: UL 94 V0
Technology: Plastics
Material Features: Cost Effective
Flame Retardant
Good Mold Release
Heat Stabilized
High Modulus
High Stiffness
UL Listed
Country Availability: Canada
China (Mainland)
Mexico
USA
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Appliances
Building Materials
Cell Phones
Commercial Appliance
Computer Components
Construction Applications
Consumer Applications
Containers

Technical data

Table 1 of 7

10 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break) ¹¹	100	MPa	ASTM D638
Tensile Stress (Break) ¹¹	98	MPa	ISO 527
Tensile Strain (Break) ¹¹	2.9	%	ISO 527
Tensile Strain (Break) ¹¹	3	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	6060	MPa	ASTM D638
Flexural Stress ¹¹	160	MPa	ASTM D790
Flexural Stress ¹¹	164	MPa	ISO 178
Flexural Modulus ¹¹	6000	MPa	ISO 178
Flexural Modulus ¹¹	5170	MPa	ASTM D790
Tensile Modulus (at 1 mm/min) ¹¹	6300	MPa	ISO 527

Table 2 of 7

7 rows

Characteristic	Value	Unit	Method
Density ¹¹	1.48	g/cm³	ISO 1183
Density ¹¹	1.487	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.49	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.89	%	ISO 294
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.9	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	1.3	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	1.29	%	ISO 294

Table 3 of 7

6 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	251	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	226	°C	ASTM D648
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	219	°C	ISO 75/Af
Relative Temperature Index (Electrical) ᵖ ¹¹	130	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	105	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	115	°C	UL 746B

Table 4 of 7