LNP™ THERMOCOMP™ Compound AF004AH

Chemical Family: Acrylonitrile Butadiene Styrene (ABS)Styrenics

LNP THERMOCOMP AF004AH compound is based on Acrylonitrile Butadiene Styrene (ABS) resin containing 20% glass fiber. Added features of this grade include: Healthcare.

Product families

Applications

Healthcare & Pharma — Medical

Medical Devices & Assemblies
Surgical Instruments & Trays

Printing & Packaging — Packaging

Healthcare Packaging
Industrial & Transport Packaging

Electrical & Electronics — Parts & Components

Housings & Enclosures

Product Families

Plastics — Basic Thermoplastics

Styrenics

Other characteristics

Brand: LNP™ THERMOCOMP™ Compound
Polymer Name: Acrylonitrile Butadiene Styrene (ABS)
Fillers Included: Glass Fiber
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Electrical & Electronics
Healthcare & Pharma
Printing & Packaging
Technology: Plastics
Material Features: Cost Effective
High Modulus
High Stiffness
Country Availability: Canada
China (Mainland)
Mexico
USA
Plastics and Elastomers End Uses: Electrical Enclosure
Electrical Internal Frame
Internal Armature
Medical Devices
Medical Packaging
Medical/Healthcare Applications
Pharmaceutical Packaging
Surgical Devices
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 5

10 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	70	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	2.2	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	6170	MPa	ASTM D638
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	130	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	6150	MPa	ASTM D790
Tensile Stress (Break, 5 mm/min) ¹¹	81	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	2	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	6000	MPa	ISO 527
Flexural Stress ¹¹	123	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	5860	MPa	ISO 178

Table 2 of 5

8 rows

Characteristic	Value	Unit	Method
Density ¹¹	1.19	g/cm³	ISO 1183
Density ¹¹	1.19	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.24	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.2	%	ASTM D955
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.24	%	ISO 294
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.4	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.4	%	ISO 294
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.39	%	ISO 62

Table 3 of 5

2 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	103	°C	ASTM D648
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	93	°C	ISO 75/Af

Table 4 of 5

6 rows

Characteristic	Value	Unit	Method
Izod Impact (Unnotched, at 23°C) ¹¹	395	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	80	J/m	ASTM D256
Multi-Axial Impact ¹¹	3	J	ISO 6603
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	11	J	ASTM D3763
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	23	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80104, at 23°C) ¹¹	8	kJ/m²	ISO 180/1A

Table 5 of 5