To catalogue
BigRep PETG
- Chemical Family
- DiolsGlycolsPolyesters
BigRep PETG is the material is full compatible with all FFF open-build 3D printers, and has been optimized for use on BigRep large-scale machines, for a wide range of applications.
Properties
- Physical Form
- Granules
- Solid
Product families
Plastics — 3D Printing Polymers
- Thermoplastic Filament
Other characteristics
- Density
- 1270.0 - 1270.0 kg/m³
- Polymer Name
- Polyethylene Terephthalate Glycol (PETG)
- Flexural Modulus
- 2145.0 - 2145.0 MPa
- Processing Methods
- 3D Printing, Fused Filament Fabrication
- Markets
- Industrial
- Storage
Store at around room temperature and protect from direct heat or sunlight. Keep sealed in an air tight container, away from humidity.
- Benefits
PETG is a suitable alternative to PLA or ABS, depending on requirements, as it possesses excellent strength, toughness and temperature resistant properties. BigRep PETG extrudes odorlessly and readily achieves a smooth flow at temperatures from 215°C to 250°C, lending a glassy sheen to the transparent prints.
- Applications
- Industrial — Other Industrial Applications
- Technology
- Plastics
- Material Features
- Durable
- Excellent Strength
- Excellent Toughness
- Good Adhesion
- Heat Resistance
- High Temperature Resistance
- Impact Resistance
- Low Shrinkage
- HIGHLIGHTS
- High printing speed
- Thermal resistant
- Extrudes between 190-240°C
- Minimal shrinkage and warping effect
- Strong first-layer adhesion to heated print bed
- Odorless
- Certifications and Compliance
- FDA Compliant
- REACH (Europe)
- RoHS Compliant
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- 3D Printing
- Fused Filament Fabrication
Technical data
Table 1 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 50 | MPa | ISO 527 |
| Impact Strength | 7.2 | kJ/m² | ISO 179 |
| Flexural Modulus | 2145 | MPa | ISO 178 |
Table 2 of 2
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.27 | g/cm³ | — |
| Diameter | 2.85 | mm | — |
| Filament Net Weight | 2.3 / 4.5 / 8.0 | Kg | — |
| Material | PolyEthylene Terephthalate Glycol | — | — |
| Print Temperature Guideline | 205 - 220 | °C | — |
| Heating Bed | 80 | °C | — |
| VST | 70 | °C | ISO 306 VST A 120 |
