BigRep PVA
BigRep PVA is a water-soluble support filament, ideal for printing complex, ready-to-use prototypes. It is commonly used in printers with dual-extruders to provide support for objects with overhang or those with complex geometries, for which 3D printing is the only method to produce in one piece.
Properties
- Physical Form
- Granules
- Solid
Product families
- Vinyl Polymers
Other characteristics
- Polymer Name
- Polyvinyl Alcohol (PVOH)
- Markets
- Industrial
- Storage
Store at around room temperature and protect from direct heat or sunlight. Keep sealed in an air tight container, away from humidity.
- Benefits
PVA is widely used in 3D printing as support material that can then be dissolved. Some complex designs involving many extended overhangs can only be produced by using a support structure. Otherwise, the printed structure would warp or simply collapse.; BigRep PVA support filament is water soluble and the warmer the water, the faster it dissolves, so it provides more time for creating those tortuous prints and demands less time for refining the results.; This advanced filament has been optimized for improved melt flow characteristics, meaning there is no longer cause for concern about clogging of the hot end.
- Applications
- Industrial — Other Industrial Applications
- Technology
- Plastics
- Material Features
- High Tensile Strength
- Non-Toxic
- Odorless
- HIGHLIGHTS
- Water-soluble synthetic polymer
- Nontoxic
- Odorless
- Extrudes best between 190°C and 200°C
- Optimized for improved melt flow characteristics
- Needs to be dried
- High tensile strength to support heavy prints
- Certifications and Compliance
- REACH (Europe)
- RoHS Compliant
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 78 | MPa | ISO 527 |
| Impact Strength | 1.6 | kJ/m² | ISO 179 |
| Flexural Modulus | 3860 | MPa | ISO 178 |
Table 2 of 2
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Diameter | 2.85 | mm | — |
| Filament Net Weight | 2.3 / 4.5 / 8.0 | Kg | — |
| Material | PVA – Polyvinyl Alcohol | — | — |
| Density | 1.23 | g/cm³ | — |
| Print Temperature Guideline | 190 | °C | — |
| Heating Bed | 60 | °C | — |
| VST | 60 | °C | ISO 306 VST A 120 |
