GacoFlex® LM60
- Chemical Family
- Polyurethanes (PU)
GacoFlex® LM60 is a 100% solids liquid applied two-component coating that cures into a water-resistant polyurethane elastomeric membrane. LM60H is designed for application on horizontal and low slope surfaces, at the rate of at least four gallons per 100 ft², to yield a 1/16" thick membrane. LM60V is designed for the same application rate and the yield on vertical surfaces.
Properties
- Physical Form
- Liquid
Product families
Applications
- Waterproofing & Weatherproofing
Product Families
- Other Paints & Coatings
Other characteristics
- Brand
- GacoFlex
- Features
- Service Life Extension, Water Resistant
- Product Type
2K (2 component) Coating, Elastomeric Coating, Solventless & High Solids Coating; 2K (2 component) Coating; Elastomeric Coating; Solventless & High Solids Coating
- Application Area
- Roofing Membranes
- Application Method
- Brush, Spray, Trowel, Wipe
- Markets
- Building & Construction
- Benefits
Innovative solvent-free, 100%polyurethane technology.; Long Life Cycle - Over 45 years of successful applications.; Single Application - Apply with squeegee, trowel, spray or brush.
- Coverage
Mil ft² per Gallon:1600; Applied Coverage: 4 Gals./100 ft² to yield 1/16" thickness.
- Technology
- Ready-to-Use Products
- Certification
Product certified for Low chemical emissions UlCOM/GC Ul 2818.
- Labeling Claims
- Solvent-free
- Recommended Uses
Intended primarily for use as a high build waterproofing membrane over concrete, metal and plywood. For non-potable water facilities where pH is less than 6.5 an acid resistant version of LM60 is available for use.
- Storage Stability
- One year at 50°F - 80°F.
- Application Methods
- Brush
- Spray
- Trowel
- Wipe
- Ready to Use Product Features
- Service Life Extension
- Water Resistant
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 230 - 250 | psi | D412 |
| Tensile Elongation | 280 - 320 | % | D412 |
| Tensile Permanent Set at Break | max. 10 | % | D412 |
| Hardness (Using Type 00 Hardness Gauge, 70°F) | 77.0 | Shore A | C836 |
| Adhesion (Peel Strength) | 11.0 | bf/inch | C836 |
| Tear Resistance (Die C) | 30.0 | lb/inch.min | D624 |
| Water Absorption (21 day R.T.) | max. 1 | % | D471 |
| Water Vapor Permeability | 0.012 | perm inches | E96 |
| Low Temperature Brittleness (-50°F) | Pass | — | D746 |
| Solids (By Volume) | 100.0 | % | — |
| Flash Point | min. 200 | °F | ASTM D56 (Closed Cup) |
