GacoFlex® LM60AR
- Chemical Family
- Polyurethanes (PU)
GacoFlex® LM-60AR is a 100% solids liquid applied two-component coating that cures into a water-resistant polyurethane elastomeric membrane. LM-60HAR is designed for application on horizontal and low slope surfaces, at the rate of at least four gallons per 100 ft², to yield a 1/16" thick membrane. LM-60VAR is designed for the same application rate and the yield on vertical surfaces.
Product families
Applications
- Waterproofing & Weatherproofing
Product Families
- Other Paints & Coatings
Other characteristics
- Brand
- GacoFlex
- Features
Acid Resistant, Service Life Extension, Water Resistant
- Product Type
Elastomeric Coating, Solventless & High Solids Coating; Elastomeric Coating; Solventless & High Solids Coating
- Application Method
- Brush, Spray, Trowel, Wipe
- Markets
- Building & Construction
- Benefits
Innovative solvent-free, 100%polyurethane technology.; Long Life Cycle - Over 45 years of successful applications.; Single Application - Apply with squeegee, trowel, spray or brush.
- Technology
- Ready-to-Use Products
- Certification
Product certified for Low chemical emissions UlCOM/GC Ul 2818.
- Labeling Claims
- Solvent-free
- Applied Coverage
- Mil ft² per Gallon
- 1600
- Applied Coverage
- 4 Gals./100 ft². to yield 1/16" thickness.
- Recommended Uses
Intended primarily for use as a high build waterproofing membrane over concrete, metal and plywood. This grade of LM-60 can be used in areas with a pH ≥ 4.
- Storage Stability
- 12 months at 50°F to 80°F.
- Application Methods
- Brush
- Spray
- Trowel
- Wipe
- Ready to Use Product Features
- Acid Resistant
- Service Life Extension
- Water Resistant
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 165 - 185 | psi | ASTM D412 |
| Tensile Elongation | 280 - 320 | % | ASTM D412 |
| Tensile Permanent Set at Break | max. 10 | % | ASTM D412 |
| Hardness (70°F) | 30.0 | Shore A | ASTM D2240 |
| Adhesion (Peel Strength) | 11.0 | bf/inch | ASTM C836 |
| Tear Resistance (Die C) | 30.0 | lb/inch.min | ASTM D624 |
| Water Absorption (21 day R.T.) | max. 1 | % | ASTM D471 |
| Water Vapor Permeability (100 RH Difference, Procedure BW) | 0.012 | perm inches | ASTM E96 |
| Low Temperature Brittleness (-50°F) | Pass | — | ASTM D746 |
| Solids (By Volume) | 100.0 | % | — |
| Flash Point | min. 200 | °F | ASTM D56 (Closed Cup) |
