GacoFlex® N1207

Product families

Other characteristics

Brand

GacoFlex

Product Type

1K (1 component) Adhesive

Compatible Substrates & Surfaces

Concrete, Elastomers & Rubbers, Leather, Metal, Steel, Wood

Usage

A contact adhesive for bonding rubber, neoprene, leather and other materials to themselves or to concrete, wood, steel or other metals.

Markets

Building & Construction

Application

Surfaces must be cleaned and dry, free from all oil, grease and corrosion products. Refer to primer recommendations for Gaco Western elastomers.; Stir adhesive thoroughly before using. Apply one or two coats of GacoFlex N-1207 to both surfaces by brush. Apply sufficient N-1207 to assure uniform coverage over the entire area, between 150 to 200 square feet per gallon per coat.; Allow adhesive to dry to touch. Normally a drying time of 1 to 1½ hours is sufficient. It should be noted that it is important to allow complete drying of the N-1207 adhesive. Poor adhesion can result from mating the two surfaces before N-1207 is sufficiently dry; whereas, even after drying overnight, the N-1207 can be reactivated by a light solvent wiping with Gaco thinner.; GacoFlex N-1207 provides a good, firm bond upon contact and care should be exercised to align surfaces properly. After contact, press surfaces together using manual or mechanical means of applying pressure.; An instantaneous bond is achieved which increases in strength for several weeks as the adhesive cures. The initial bond is strong enough for immediate service in most instances.

Show in full

Technology

Ready-to-Use Products

Certification

Product certified for Low chemical emissions UlCOM/GC Ul 2818.

Labeling Claims

VOC-free

Storage Stability

12 Months

Ready to Use Product Features

General Purpose

Compatible Substrates and Surfaces

• Concrete
• Elastomers & Rubbers
• Leather
• Metal
• Steel
• Wood