LESTAC DCPD100
- CAS Number
- 64742-16-1
- EC Number
- 265-116-8
- Chemical Name
- Petroleum resins
- Chemical Family
- Hydrocarbons
LESTAC DCPD100 is pale yellow granular or flake thermoplastic resin obtained from mainly thermo polymerizing unsaturated DCPD derived from the process of thermal cracking of naphtha. The major usages are Adhesive such as pressure-sensitive adhesive, hot-melt adhesive, Coating, Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as water repellent agent, concrete curing agent and binder for asphalt.
Identification
- CASE Ingredients Functions
- Binder & ResinWater Repellent
Other characteristics
- Brand
- LESTAC
- Functions
- Binder, Binder & Resin, Water Repellent
- Markets
- Adhesives & Sealants
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Paints & Coatings
- Printing & Packaging
- Storage
Palletized forms of resins may block or lump in hot weather climates or if stored near heat sources. Inside storage is recommended and keep at temperature not exceeding 25°C.
- PACKAGING
25kgs/paper bag, Woven-plastic, big bags: 500kgs, 600kgs, 750kgs, 1000kgs
- Technology
- CASE Ingredients
- Industrial Additives & Materials
- Key Property
Yellow color and low odor; Excellent compatibility with EVA, Synthetic rubbers; Good resistance to acid, alkalis and moisture; Low Molecular weight and Low volatility; Distinguished initial adhesion andcohesive intensity
- Adhesive & Sealant Type
- Hot Melt Adhesive
- Pressure Sensitive Adhesive
- Compatible Polymers and Resins
- Epoxies (EP)
- Ethylene Vinyl Acetate (EVA)
- Industrial Additives End Use
- Asphalt
- Cement
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Acid Value | max. 1.0 | mg KOH/g | — |
| Softening Point (Ring & Ball) | 95-105 | °C | ASTM E 28 |
| Bromine Number | max. 45 | Br.cg/g | ASTM D 1159 |
| Color (50% ResinSoild in tulene, Ga.#) | 5 - 11# | — | ASTM D 1544 |
| Specific Gravity (20/20°C) | 1.04 - 1.10 | — | ASTM D 71 |
