LESTAC P120
- CAS Number
- 64742-16-1
- EC Number
- 265-116-8
- Chemical Name
- Petroleum resins
- Chemical Family
- Hydrocarbons
LESTAC P120 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.
Identification
- CASE Ingredients Features
- Excellent Tack Stability
- CASE Ingredients Functions
- TackifierWater Repellent
Other characteristics
- Brand
- LESTAC
- Features
- Excellent Tack Stability
- Compatible Polymers & Resins
- Ethylene Vinyl Acetate (EVA)
- Markets
- Adhesives & Sealants
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Paints & Coatings
- Printing & Packaging
- Storage
Palletized forms of resins may block or lump in hot weather climates or if stored near heat sources. Inside storage is recommended and keep at temperature not exceeding 25°C.
- PACKAGING
25kgs/paper bag, Woven-plastic, big bags: 500kgs, 600kgs, 750kgs, 1000kgs
- Technology
- CASE Ingredients
- Industrial Additives & Materials
- Key Property
Yellow color to brown color; Excellent compatibility with EVA, Synthetic rubbers; Good resistance to acid, alkalis and moisture; Low Molecular weight and Low volatility; Distinguished initial adhesion andcohesive intensity
- Adhesive & Sealant Type
- Hot Melt Adhesive
- Compatible Polymers and Resins
- Ethylene Vinyl Acetate (EVA)
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Acid Value | max. 1.0 | mg KOH/g | — |
| Bromine Number | max. 30 | Br.cg/g | ASTM D 1159 |
| Color (50% ResinSoild in tulene, Ga.#) | 4 - 12# | — | ASTM D 1544 |
| Softening Point (Ring & Ball) | 100-110 | °C | ASTM E 28 |
| Specific Gravity (20/20°C) | 1.04 - 1.10 | — | ASTM D 71 |
