Pecora P-120

Product families

Other characteristics

Brand

Pecora

Features

Excellent Substrate Adhesion

Product Type

• 1K (1 component) Coating, Primer
• 1K (1 component) Coating
• Primer

Application Method

Brush, Roller

Markets

Printing & Packaging

Basic Uses

To enhance the adhesion of Pecora polyurethane and silicone sealants to nonporous substrates.

Installation

Preparation:; Pecora P-120 can be applied by brush or roller as received.; P-120 Primer should be applied within the confines of the joint.; Do not allow primer to splash out of the joint as a slight discoloration of the surrounding surface may result.; It is recommended that the exposed surfaces be masked before applying primer.; If area outside of joint is contaminated with P-120, or if cracks appear in the primer film, too heavy a coat was applied, it should be removed immediately with mineral spirits and reapplied.; Application:; It is essential that surfaces be clean, dry and free of all contaminating substances prior to application.; Fresh concrete or mortar should be thoroughly cured and dry before application of Pecora P-120.; When resealing surfaces formaly sealed with oil base or other mastics, all traces of old material should be removed.; If oil has been absorbed by masonry, sandblasting or cuting back of joints may be necessary.; Clean surfaces with mineral spirits.; Brushes, rags and solvents used for cleaning should be free of oil and grease.; Drying Time:; Primer must be dry before application of sealant.; At normal temperature and humidity, the primer should be allowed to air dry for 60 to 90 minutes.; Low humidity requires a longer drying time.; The drying time necessary for specific application is best determined by experimentation.; Precautions:; Flammable.; Keep away from heat, sparks, and flame.; Use only in well- ventilated areas.; May form flammable or explosive vapor - air mixture during use.; May cause eye, skin, or respiratory tract irritation, or allergic reaction.; Do not breathe fumes, dust, vapors, or mist.; Keep container closed when not in use.; Harmful if inhaled or absorbed through skin.; Inhalation causes headache, drowsiness, or other effects to the central nervous system.; Kidney or liver damage can occur.; Contains material that may adversely affect the developing fetus.; Use only with adequate ventilation or wear an appropriate NIOSH-approved respirator.; Do not get in eyes, on skin or on clothing.; Wear suitable chemical resistant gloves.; Wash thoroughly after handling.; Danger: Harmful or fatal if swallowed. Repeated contact may,without symptoms, increase susceptibility ofthese effects.; Keep out of the reach of children.

Show in full

Technology

Ready-to-Use Products

Packaging Type

Cans

Application Methods

• Brush
• Roller

Shipping Limitatons

DOT Classifications: Flammable.

Packaging & Stability

Packaging

30 fl.oz (887 ml) metal can.

Packaging Stability

12 months at 80°F in tightly closed containers.

Ready to Use Product Features

Excellent Substrate Adhesion