Pecora P-75

Product families

Other characteristics

Brand

Pecora

Features

Excellent Substrate Adhesion

Product Type

• 1K (1 component) Coating, Primer
• 1K (1 component) Coating
• Primer

Application Method

Brush, Roller

Compatible Substrates & Surfaces

Brick, Concrete

Color

Amber

Markets

• Building & Construction
• Paints & Coatings
• Printing & Packaging

Basic Uses

To enhance the adhesion of various Pecora sealants to porous substrates such as concrete, brick, limestone, etc.. To prevent deterioration of porous masonry surfaces which are weak and friable.

Installation

Preparation:; Pecora P-75 can be applied by brush or roller as received.; P-75 primer should be applied within the confines of the joint.; Do not allow primer to splash out of the joint as a slight discoloration of the surrounding surface may result.; It is recommended that the exposed surfaces be masked before applying primer.; If area outside of joint is contaminated with P-75, it should be removed immediately with mineral spirits.; Application:; It is essential that surfaces be clean, dry and free of all contaminating sub stances prior to application.; Fresh concrete or mortar should be thoroughly cured and dry before application of Pecora P-75.; When resealing surfaces formally sealed with oil base or other mastics, all traces of old material should be removed.; If oil has been absorbed by masonry, sandblasting or cutting back of joints may be necessary brushes, rags and solvents used for cleaning should be free of oil and grease.; Drying Time:; Approximately I hour at 70°E Pecora P-75 primer should be allowed to dry completely before application of sealant.; If alowed to dry over 8 hours, repriming is necessary.; P-75 primer is a moisture activated material.; Allow longer drying times when humidity levels are below 50%.; Precautions:; Flammable and toxic.; Contains disocyanates.; Keep away from heat, sparks and flame.; Use only in well-ventilated areas.; Do not breath fumes, dust, vapors or mist.; Keep container closed when not in use.; Harmful if inhaled or absorbed through the skin.; Use only with adequate ventilation or wear an appropriate NIOSH-approved respi- rator.; Do not get in eyes, on skin,or on clothing.; Wear suitable chemical resistant gloves.; Wash thoroughly after handling.; Repeated contact may, without symptoms, increase susceptibility of these effects.; Harmful or fatal if swallowed.; Keep out of the reach of children.; For professional use only.

Show in full

Technology

Ready-to-Use Products

Packaging Type

• Cans
• Pails

Application Methods

• Brush
• Roller

Shipping Limitatons

DOT Classifications: Flammable.

Packaging & Stability

Packaging:; 30 fl.oz. (887 ml) metal can.; 5 gallon (19 L) metal pail.; Packaging Stability: 6 months at 80°F in tightly closed containers.

Ready to Use Product Features

Excellent Substrate Adhesion

Compatible Substrates and Surfaces

• Brick
• Concrete