Pecora P-150

Product families

Other characteristics

Brand

Pecora

Features

Excellent Substrate Adhesion, Good Non-Yellowing Properties

Product Type

• 1K (1 component) Coating, Primer
• 1K (1 component) Coating
• Primer

Application Method

Brush, Roller

Compatible Substrates & Surfaces

Concrete

Markets

• Paints & Coatings
• Printing & Packaging

Basic Uses

Pecora P-150 Primer is a one-component, non-yellowing polyisocyanate to enhance the adhesion of various Pecora Polyurethane and silicone sealants to porous and non-porous substrates.

Installation

Preparation:; Pecora P-I50 can be applied by brush or roller as received.; P- 150 Primer should be applied within the confines of the joint.; Do not allow primer to splash out of the joint as a slight discoloration of the surrounding surface may result.; It is recommended that the exposed surfaces be masked before applying primer.; lf area outside of joint is contaminated with P-150, it should be removed immediately wich mineral spirits.; Application:; It is essential that surfaces be dean, dry and free of all contaminating sub stances prior to application.; When resealing surfaces formaly sealed with oil base or other mastics, all traces of old material should be removed.; If oil has been absorbed by masonry, sandblasting or cuting back of joints may be necessary.; Brushes, rags and solvents used for cleaning should be free of oil and grease.; Drying Time:; Approximately I hour at 75°F Pecora P-I50 Primer should be allowed to dry completely before application of sealant.; If allowed to dry over 8 hours, repriming is necessary.; P-150 Primer is a moisture activated material.; Allow longer drying times when humidity levels are below 50%.; Precautions:; Flammable and toxic. Contains diisocyanates.; Keep away from heat, sparks, and flame.; Use only in well ventilated areas.; May form flammable or explosive vapor-air mixture during use.; May cause eye, skin, or respiratory tract irritation, or allegric reaction.; Do not breathe fumes, dust, vapors, or mist.; Keep container closed when not in use.; Harmful if inhaled or absorbed through skin.; Inhalation causes headache, drowsiness, or other effects to the central nervous system.; Kidney or liver damage can occur.; Contäins material that devel may adversely affect the developing fetus.; Use only with adequate ventilation or wear an appropriate NIOSH-approved respirator.; Do not get in eyes, on skin, or on clothing.; Wear suitable chemical resistant gloves.; Wash thoroughly after handling. Harmful or fatal if swallowed.; Repeated contact may, without symptoms, increase suspectibility of these effects.; Keep out of the reach of children.

Show in full

Technology

Ready-to-Use Products

Application Methods

• Brush
• Roller

Shipping Limitatons

DOT Classifications: Flammable.

Packaging & Stability

Packaging Stability

6 months at 80°F in tightly closed containers.

Packaging Stability

12 months at 80°F in tightly closed containers.

Ready to Use Product Features

• Excellent Substrate Adhesion
• Good Non-Yellowing Properties

Compatible Substrates and Surfaces

Concrete