BJB Enterprises TC-5005-AB
- Chemical Family
- Silicones
BJB Enterprises TC-5005-AB is a room temperature curing silicone elastomer intended primarily for making silicone skins, but is also used as a general purpose rubber. This product is a condensation cured system using a tin catalyst that provides a 40-60 minute work time with 16-24 hour demold time. If a softer product is required, refer to the TC-5005-AB-C data bulletin. TC-5005 “C” can be added to extend the elongation andreduce thehardness of the TC-5005-AB.
Properties
- Physical Form
- Liquid
Product families
Applications
- Implants & Prosthetics
Product Families
- Silicone Elastomers
Other characteristics
- Features
High Elongation, Low Viscosity, Pourable, Translucent
- Polymer Name
- Silicone Elastomer
- Tear Strength
- 8.225 - 8.225 kN/m
- Usage
- RoHS/REACH SVHC Compliant
- Low viscosity and easily poured
- Perfect for skin simulationTranslucent in color
- High elongation
- Markets
- Healthcare & Pharma
- Storage
Store ambient temperatures, 65-80°F (18-27°C). Unopened containers will have a shelf life of6 months from date ofshipment when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
- Appearance
- Translucent
- Cure
- Air Dry
- Technology
- Elastomers
- Safty Precaution
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact on the skin may cause an allergic reaction.Eye protection is extremely important. Always use approved safety glasses or goggles when handling this product.
- Material Features
- High Elongation
- Low Viscosity
- Pourable
- Translucent
- Certifications and Compliance
- RoHS Compliant
- SVHC Compliant
Technical data
Table 1 of 2
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Hardness | 5 - 15 | Shore A | ASTM D 2240-04e1 |
| Density | 1.09 | g/cc | ASTM D 792-00 |
| Cubic | 25.7 | Inches per Pound | — |
| Tensile Strength | 474 | psi | ASTM D412-98a(2002)e1 |
| Elongation | 550 | % | ASTM D412-98a(2002)e1 |
| Tear Strength | 47 | pli | ASTM D624-00e1 Die B |
| Shrinkage Linear | Nil | in/in | ASTM D2566 (1” depth) |
Table 2 of 2
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mix Ratio by weight (Part A) | 100 | — | — |
| Mix Ratio by volume (Part A) | 100 | — | — |
| Specific Gravity (77°F (25°C), Part A) | 1.09 | — | — |
| Color (Part A) | Colorless | — | — |
| Viscosity (77°F (25°C), Part A) | 28000 | — | Brookfield |
| Mixed Viscosity (77°F (25°C)) | 15250 | cps | Brookfield |
| Work Time (100g mass, 77°F (25°C)) | 40 - 60 minutes | — | — |
| Demold Time (77°F (25°C)) | 16 - 24 hours | — | — |
| Mix Ratio by weight (Part B) | 10 | — | — |
| Mix Ratio by volume (Part B) | 11 | — | — |
| Specific Gravity (77°F (25°C), Part B) | 0.99 | — | — |
| Color (Part B) | Colorless | — | — |
