BJB Enterprises TC-1618-AB
- Chemical Family
- Epoxy & Epoxy Derivatives
BJB Enterprises TC-1618-AB is an aluminum filled hi-temp epoxy surface coat that provides a tough 90 Shore D surface. This resin compound can be applied with a brush, to a thickness of 1/16" on vertical surfaces or over sharp corners without sag or run-off. TC-1618-AB features excellent heat resistance with ability to handle constant use at temperatures up to 300F (149C). This system does not contain "MDA" or "VCHD".
Properties
- Physical Form
- Liquid
- Paste
Product families
- Epoxies
Other characteristics
- Polymer Name
- Epoxy Resins & Compounds
- Markets
- Industrial
- Cure
- Heat Cure
- Applications
- Industrial — Other Industrial Applications
- Technology
- Plastics
- Fillers Included
- Aluminum
- Safty Precaution
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact on the skin may cause an allergic reaction.Eye protection is extremely important. Always use approved safety glasses or goggles when handling this product.
- Application
POST CURE:; All physical properties are based upon post-curing this system. The following procedure provides the best results:; 1)150F (66C) for 1.5 to 2 Hours; 2)250F (121C) for 2 Hours; 3)300F (149C) for 2 Hours; Allow to cool in the oven. This procedure further stabilizes and eliminates possible thermal shocks for cavity tools that are temporarily clamped together for curing purposes. Rapid heat up and cooling can effectively be used after the initial post-cure process is completed.
- Material Features
- Very Good Heat Resistance
- Plastics and Elastomers Functions
- Resin
