ZincGard® 1500 VOC
- Chemical Family
- Zinc & Zinc Compounds
ZincGard® 1500 VOC is a rapid recoat primer that provides excellent corrosion protection and undercutting protection. Excellent for use in industrial, coastal, marine and freshwater environments. May be used on structural steel, steel tanks, offshore platforms, barges refineries, petrochemical plants, power plants, railcars, pulp & paper mills and other areas as recommended. May also be used to field touch-up inorganic zinc and/or provide galvanic protection for properly prepared steel substrates.
Product families
- Primers & Sealers
Other characteristics
- Brand
- ZincGard
- Features
Corrosion Resistant, Creep Resistant, Extended Recoat Window, Good Adhesion, Low VOC, Salt Water/Spray Resistant, Water Resistant
- Product Type
- 2K (2 component) Coating, Primer
- 2K (2 component) Coating
- Primer
- Application Area
Barges, Marine Applications, Railcars, Refineries, Tanks; Barges; Marine Applications; Railcars; Refineries; Tanks
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Metal, Steel
- Markets
- Automotive & Transportation
- Paints & Coatings
- Pot Life
Six hours at 75° and less at higher temperatures.
- Topcoats
ZincGard 1500 VOC is an easy to coat primer using either an epoxy or urethane. EpoxyGrip 2000 is the recommended epoxy topcoat for a two-coat application tie coat for a three coat application. MultiGrip 7000 XP VOC is recommended as a direct topcoat to ZincGard 1500 VOC.
- Shelf LIfe
6 months for the Part A and Part B and 3 years for the Zinc Filler when stored inside at 40°F to 110°F.
- Substrates
ZincGard 1500 VOC is applied directly to properly prepared steel as the primer. Direct contact with the steel substrate is required to provide optimal galvanic protection to the underlying steel surface.
- Technology
- Ready-to-Use Products
- Labeling Claims
- Low VOC
- Application Methods
- Brush
- Roller
- Spray
- Ready to Use Product Features
- Corrosion Resistant
- Creep Resistant
- Extended Recoat Window
- Good Adhesion
- Low VOC
- Salt Water/Spray Resistant
- Water Resistant
- Compatible Substrates and Surfaces
- Metal
- Steel
Technical data
Table 1 of 3
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Abrasion Resistance (1 kg Load/1000 Cycles) | Weight loss | — | — |
| Adhesion | 3912.0 | psi | ASTM D 4541 |
| Continuous Temperature Resistance (Dry) | 250.0 | °F | — |
| Abrasion Resistance (CS 17 Wheel) | 225.0 | mg | ASTM D 4060 |
| Impact Resistance (Direct Impact) | 80.0 | in-lbs. | ASTM D 2794 |
| Non-Continuous Temperature Resistance (Dry) | 300.0 | °F | — |
| Reducer 6 | 0.8 | lbs./gal. | — |
| Reducer 8 | 0.8 | lbs./gal. | — |
| Theoretical Coverage of Mixed Gallon (1 mil) | 1123.0 | sq. ft. | — |
| Theoretical Volume Solids of Mixed Material | 69 - 71 | % | ASTM D 2697 |
| Volatile Organic Content Unthinned | 0.8 | lbs./gal. | — |
| Zinc in Dry Film | 80.0 | % | — |
Table 2 of 3
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Dry Film Thickness | 2 - 4 | mils |
| Theoretical Coverage (3 mils) | 374.0 | sq. ft. |
| Wet Film Thickness | 4 - 6 | mils per coat |
Table 3 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Salt Spray | 7200.0 | Hours | ASTM B 117 |
