EpoxyGrip® 2300
EpoxyGrip® 2300 is used as a universal primer over marginally prepared steel substrates and as a bonding (tie) coat over old existing, aged coatings. The outstanding wetting characteristics of EpoxyGrip 2300 allows the coating to penetrate tightly adherent rust and voids in existing coatings to yield a sound base for a wide variety of fresh topcoats. Being solvent free, edges of existing coatings are not lifted thus reducing undercutting and peeling of the existing coating. Excellent for use as a tie coat over existing coatings, as well as over rusted and pitted steel surfaces. Excellent for use on structural steel, steel tanks, barges, water tanks, refineries petrochemical plants, power plants, railcars, pulp & paper mills and others as recommended. Acceptable as a primer for drywall substrates.
Product families
Applications
- Rail & Mass Transit Coatings
- Industrial Coatings
- Rail & Mass Transit
Product Families
- Primers & Sealers
Other characteristics
- Brand
- EpoxyGrip
- Features
Corrosion Resistant, Excellent Flexibility, Excellent Substrate Adhesion, Excellent Wetting Behaviour, Good Stress Strain Performance, Low Stress, Translucent; Outstanding wetting and adhesion properties; Excellent adhesion to old coatings and marginally prepared substrates; Reduces edge lifting of old coatings; Outstanding flexibility; Excellent as a universal primer and/or tie coat; Very low stress; Trace solvent; Contains corrosion inhibitors; Contrasting translucent yellow color
- Product Type
2K (2 component) Coating, Primer, Solventless & High Solids Coating; 2K (2 component) Coating; Primer; Solventless & High Solids Coating
- Application Area
- Barges, Railcars, Railing, Refineries, Tanks
- Barges
- Railcars
- Railing
- Refineries
- Tanks
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Coated Surfaces, Metal, Steel
- Color
- Yellow
- Markets
- Automotive & Transportation
- Paints & Coatings
- Pot Life
- One hour at 75° and less at higher temperatures.
- Topcoats
EpoxyGrip 2300 is typically topcoated with epoxies and / or polyurethanes such as EpoxyGrip 2100, EpoxyGrip 2000, EpoxyGrip 2200, MasticGrip 2500, UreGrip 3000 and UreGrip 3300. EpoxyGrip 2300 may also be topcoated with alkyds, silicone alkyds, vinyls, acrylics and others as recommended.
- Shelf LIfe
2 years for both the Part A and B when stored inside at 40°F to 110°F.
- Substrates
EpoxyGrip 2300 is used primarily over Hand Tool cleaned steel where high performance is required and abrasive blasting is impractical. Should be used as a tie coat over most existing aged coatings. A test patch over aged existing coatings is recommended.
- Technology
- Ready-to-Use Products
- Shipping Data
- Package unit
- Flash Point: (Setaflash)
- Labeling Claims
- Solvent-free
- Application Methods
- Brush
- Roller
- Spray
- Ready to Use Product Features
- Corrosion Resistant
- Excellent Flexibility
- Excellent Substrate Adhesion
- Excellent Wetting Behaviour
- Good Stress Strain Performance
- Low Stress
- Translucent
- Compatible Substrates and Surfaces
- Coated Surfaces
- Metal
- Steel
Technical data
Table 1 of 2
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Adhesion | 4664.0 | psi | ASTM D 4541 |
| Continuous Temperature Resistance (Non-immersion) | 250.0 | °F | — |
| Impact Resistance (Direct Impact) | 160.0 | in-lbs. | ASTM D 2794 |
| Non-Continuous Temperature Resistance (Non-Immersion) | 300.0 | °F | — |
| Reducer 1 (1 pint/gal.) | 0.9 | lbs./gal. | — |
| Reducer 2 (1 pint/gal.) | 0.96 | lbs./gal. | — |
| Reducer 8 (1 pint/gal.) | 0.0 | lbs./gal. | — |
| Theoretical Coverage of Mixed Gallon (1 mil) | 1604.0 | sq. ft. | — |
| Theoretical Volume Solids of Mixed Material | 100.0 | % | — |
| Volatile Organic Content Unthinned | 0.0 | lbs./gal. | — |
Table 2 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Dry Film Thickness | 1 - 2 | mils per coat |
| Theoretical Coverage (1 mil DFT) | 1604.0 | sq. ft. |
| Theoretical Coverage (2 mils DFT) | 802.0 | sq. ft. |
| Wet Film Thickness | 1 - 2 | mils |
